equipment
chinese machinary      chinese equipment      
Main page | News | Guestbook | Contact us
Русская версия

Meters - general

Content:
00 标准化、质量管理
01 技术管理
02 经济管理
04 基础标准与通用方法
05 仪器、仪表用材料和元件
06 工艺与工艺装备
07 电子计算机应用
08 标志、包装、运输、贮存
09 卫生、安全、劳动保护


N10 GB/T 777 - 1985 I业自动化仪表用模拟气动信号
Analogue pneumatic signal for industrial process measurement and control instruments
N10 GB/T 2625 - 1981 过程检测和控制流程图用图形符号和文字代号
Process detection and control flow chart - Symbols and letter codes
N10 GB/T 3369 - 1989 工业自动化仪表用模拟直流电流信号
Analogue direct current signals for industrial process measurement and control instruments
N10 GB/T 3370 - 1989 工业自动化仪表用模拟直流电压信号
Analogue direct voltage signals for industrial process measurement and control instruments
N10 GB/T 3387 - 1992 工业过程测量和控制系统用动圈式指示仪性能评定方法
Methods of evaluating the performance of moving coilind for industrial-process measurement and control systems
N10 GB/T 4439 - 1984 工业自动化仪表工作条件振动
Industrial process measurement and control instrument operating conditions - Vibration
N10 GB/T 4830 - 1984 工业自动化仪表气源压力范围和质量
Pressure range and quality of air supply for the industrial process measurement and control instruments
N10 GB/T 13283 - 1991 工业过程测量和控制用检测仪表和显示仪表精确度等级
Accuracy class of measuring instruments and display instruments for industrial process measurement and control
N10 GB/T 15479 - 1995 工业自动化仪表绝缘电阻、绝缘强度技术要求和试验方法
Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
N10 GB 16655 - 1996 工业自动化系统集成制造系统安全的基本要求
Industrial automation systems - Safety of integrated manufacturing systems - Basic requirements
N10 GB/T 16657.2 - 1996工业控制系统用现场总线第2部分: 物理层规范和服务定义
Fieldbus standard for Use in industrial control sys-tem - Part 2: Physical layer specification and service definition
N10 GB/T 17212 - 1998 工业过程测量和控制术语和定义
Industrial-process measurement and control - Terms and definitions
N10 GB/T 17214.1 - 1998工业过程测量和控制装置工作条件 第l部分: 气候条件
Industrial-process measurement and control equipment - operating conditions - Part l: Climatic conditions
N10 GB/T 17214.3 - 2000工业过程测量和控制装置的工作条件 第3部分: 机械影响
Operating conditions for industrial-process measure-merit and control equipment - Part 3: Mechanical influences
N10 GB/T 18268 - 2000 测量、控制和实验室用的电设备电磁兼容性要求
Electrical equipment for measurement, control and laboratory use - EMC requirements
N10 GB/T 18271.1 - 2000过程测量和控制装置 通用性能评定方法和程序第1部分: 总则
Process measurement and control devices - General methods and procedures for evaluating performance - Part l: General considerations
NIO GB/T 18271.2 - 2000过程测量和控制装置 通用性能评定方法和程序第2部分: 参比条件下的试验
Process measurement and control devices - General methods and procedures for evaluating performance - Part2: Tests under reference conditions
N10 GB/T 18271.3 - 2000过程测量和控制装置 通用性能评定方法和程序第3部分: 影响量影响的试验
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantifies
N10 GB/T 18271.4 - 2000过程测量和控制装置 通用性能评定方法和程序第4部分: 评定报告的内容
Process measurement and control devices - General methods and procedures for evaluating performance - Part4: Evaluation report content
N10 GB/T 18272.1 - 2000工业过程测量和控制 系统评估中系统特性的评定第1部分: 总则和方法学
Industrial -process measurement and control - Evaluation of system properties for the purpose of system assessment - Part l: General consideration and methodology
N10 GB/T 18272.2 - 2000工业过程测量和控制 系统评估中系统特性的评定第2部分: 评估方法学
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology
N10 GB/T 18272.3 - 2000工业过程测量和控制 系统评估中系统特性的评定第3部分: 系统功能性评估
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality
N10 GB/T 18272.5 - 2000工业过程测量和控制 系统评估中系统特性的评定第5部分: 系统可信性评估
Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system depend-ability
N10 GB/Z 19582.1 - 2004基于Modbus协议的工业自动化网络规范第l部分: Modbus应用协议
Modbus industrial automation network specification - Part l: Modbns application protocol
N10 GB/Z 19582.2 - 2004基于Modbus协议的工业自动化网络规范第2部分: Modbns协议在串行链路上的实现指南
Modbus industrial automationnetwork specification - Part 2: Modbus Protocol implementation guide over serial link
N10 GB/Z 19582.3 - 2004基于Modbus协议的工业自动化网络规范第3部分: Modbus协议在TCP/IP上的实现指南
Modbns industrialautomationnetwork specification - Part 3: Modbus protocol implementation guide over TCP/IP
N11 GB/T 1226 - 2001 一般压力表
General pressure gauge
N11 GB/T 1227 - 2002 精密压力表
Accurate pressure gauge
N11 GB/T 2904 - 1982 镍铬一金铁、铜一金铁低温热电偶丝及分度表
Nickel-Chromium/Gold-Iron, Copper/Gold-Iron low temperature thermocouple wires and their reference tables
N11 GB/T 2974 - 1982 工业用热电偶丝检验方法
Testing methods for industrial thermocouple wires
N11 GB/T 4989 - 1994 热电偶用补偿导线
Extension and compensating cables for thermocouples
N11 GB/T 5603 - 1985 负荷传感器名词术语
Load cell terminology and definitions
N11 GB/T 5604 - 1985 负荷传感器试验方法
Load cell test procedure
N11 GB/T 9138 - 1988 回弹仪
Concrete test hammer
N11 GB/T 13335 - 1991 磁弹性测力称重传感器
Magnetoelastic force and weight transducers
N11 GB/T 15309 - 1994 船舶货舱温湿度仪技术要求及试验方法
Technical requirements and testing methods for temperature and humidity insfwuments for cargo hold of vessel
N11 GB/T 16701.1 - 1996热电偶材料试验方法第一部分: 贵金属热电偶丝热电动势测量方法
Standard termethods for thermocouple materials - Part 1: Methods for measuring the thermoelectric force of noble metal thermocouple wires
N11 GB/T 16701.2 - 1996热电偶材料试验方法第二部分: 廉金属热电偶丝热电动势测量方法
Standard test methods for thermocouple materials - Part 2: Methods for measuring the thermoelectric force of base metal thermocouple wires
N11 GB/T 16839.1 - 1997热电偶第l部分: 分度表
Thermocouples - Part 1: Reference tables
NIl GB/T 16839.2 - 1997热电偶第2部分: 允差
Thermocouples - Part 2: Tolerances
N11 GB/T 19146 - 2003 红外人体表面温度快速筛检仪通用技术条件
General requirements for infrared devices for instant screening of human skin temperature
N12 GB/T 778.1 - 1996 冷水水表第1部分: 规范
Measurement of water flow in closed conduits – Meters for cold potable water - Part l: Specifications
N12 GB/T 778.2 - 1996 冷水水表第2部分: 安装要求
Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements
N12 GB/T 778.3 - 1996 冷水水表第3部分: 试验方法和试验设备
Measurement of water fow m closed conduits - Meters for cold performance - Part 3: Test method and equipment
N12 GB/T 2624 - 1993 流量测量节流装置用孔板、喷嘴和文丘里管测量充满圆管的流体流量
Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross section conduits running full
N12 GB/T 6968 - 1997 膜式煤气表
Diaphragm gas meters
N12 GB/T 9248 - 1988 不可压缩流体流量计性能评定方法
Methods of evaluating the performance of flowmeters for incompressible fluids
N12 GB/T 13282 - 1991 体积管式流量测量校准装置
Flow measurement calibration facility - Pipe prover
N12 GB/T 13638 - 1992 工业锅炉水位控制报警装置
Water level control and alarm devices for industrial boilers
N12 GB/T 13969 - 1992 浮筒式液位仪表
Displacement type level instruments
N12 GB/T 14324 - 1993 电容液位计
Electrical capacitance level meter
N12 GB/T 17611 - 1998 封闭管道中流体流量的测量术语和符号
Measurement of fluid flow in closed conduits - Vocabulary and symbols
N12 GB/T 17612 - 1998 封闭管道中液体流量的测量称重法
Measurement of liquid flow m dosed conduits - Weighing method
N12 GB/T 17613.1 - 1998用称重法测量封闭管道中的液体流量装置的检验程序第l部分: 静态称重系统
Measurement of fluid flow in closed conduits by weighing method - Procedures for checking installatious - Part l: Static weighing systems
N12 GB/T 18215.1 - 2000城镇人工煤气主管道流量测量第1部分: 采用标准孔板节流装置的方法
Flow measurement of city manufactured gas in main pipes - Part l: Method using standard orifice plate throttling device
N12 GB/T 18659 - 2002 封闭管道中导电液体流量的测量 电磁流量计的性能评定方法
Measurement of fluid flow in dosed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
N12 GB/T 18660 - 2002 封闭管道中导电液体流量的测量 电磁流量计的使用方法
Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flow meters
N12 GB/T 18940 - 2003 封闭管道中气体流量的测量涡轮流量计
Measurement of gas flow in closed conduits - Turbine meters
N15 GB/T 2613 - 1989 DDZ-Ⅲ系列电动单元组合仪表工作信号
DDz_III Series process electronic control system oper-ating signal
N15 GB/T 11005.1 - 1989 DDZ一Ⅲ系列电动单元组合仪表计算器
DDZ一III Series process electronic control system - Computing unit
N15 GB/T 11006.2 - 1989 DDz一Ⅲ系列电动单元组合仪表 调节器
DDZ一III series process electronic control system - Controller
N15 GB/T 11005.3 - 1989 DDz一Ⅲ系列电动单元组合仪表 配电器
DDZ- III series process electronic control system - Distributor
N15 GB/T 13635一1992 DDz一Ⅲ系列电动单元组合仪表 频率转换器
DDZ一Ⅲseries process electronic control system - Frequency converter
N15 GB/T 13636 - 1992 DDz一Ⅲ系列电动单元组合仪表 恒流给定器
DDZ-Ⅲseries process electronic control system - Constant current setter
N15 GB/T 13637 - 1992 DDz一Ⅲ系列电动单元组合仪表指示仪
DDZ一Ⅲseries process electronic control system - Indicating instrument
N15 GB/T 14059 - 1993 DDz一Ⅲ系列电动单元组合仪表 电流转换器
DDZ一ⅢSeries process electronic control system - Current converter
N15 GB/T 14060一1993 DDZ-Ⅲ系列电动单元组合仪表 阻抗转换器
DDZ-ⅢSeries process electronic control system - Impedance converter
N15 GB/T 1406l一1993 DDz-Ⅲ系列电动单元组合仪表记录仪
DDZ一Ⅲseries process electronic control system - Recording instrument
N15 GB/T 14062 - 1993 DDZ一Ⅲ系列电动单元组合仪表 积算器
DDZ一ⅢSeries process electronic control system – Integrating instrument
N15 G13/T 14063 - 1993 DDz-Ⅲ系列电动单元组合仪表 比值给定器
DDZ一Ⅲseries process electronic control system - Ratio setter
N15 G13/T 14064 - 1993 DDz一Ⅲ系列电动单元组合仪表 报警给定器
DDZ - ⅢSeries process electronic control system - Alarm setter
N15 GB/T 14065 - 1993 DDZ - Ⅲ系列电动单元组合仪表安全栅
DDZ一Ⅲseries process electronic control system - Safety baltier
N15 GB/T 14066一1993 DDz-Ⅲ系列电动单元组合仪表信号选择器
DDZ一Ⅲseries process electronic control system - Signal selector
N15 GB/T 14067 - 1993 DDz一Ⅲ系列电动单元组合仪表信号限制器
DDZ - ⅢSeries process electronic control system - Signal limiter
N16 GB/T 14068一1993 DDZ-Ⅲ系列电动单元组合仪表Q型操作器
DDZ一Ⅲseries process electronic control system - Q automatic/manual station
N15 GB/T 14069 - 1993 DDZ-Ⅲ系列电动单元组合仪表 电源箱
DDZ一Ⅲseries process electronic control system - Stabilized voltage supply box
N15 GB/T 17614.1 - 1998工业过程控制系统用变送器第1部分: 性能评定方法
Transmitters for use in industrial-process control systems - Part 1: Methods of evaluating the performance
N15 GB/T 17614.2 - 1998工业过程控制系统用变送器第2部分: 检查和例行试验导则
Transmitters for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
N16 GB/T 4213 - 1992 气动调节阀
Pneumatic industrial process control valves
N16 GB/T 17213.1 - 1998工业过程控制阀第1部分: 控制阀术语和总则
Industrial-process control valves - Part l: Control valve terminology and general considerations
N16 GB/T 17213.5 - 1998工业过程控制阀第5部分: 标志
Industrial-process control valves - Part 5: Marking
N16 GB/T 17213.7 - 1998工业过程控制阀第7部分: 控制阀数据单
Industrial-process control valves - Part 7: Control valve data sheet
N16 GB/T 17213.8 - 1998工业过程控制阀第8部分: 噪声的考虑第l节: 实验室内测量空气动力流流经控制阀产生的噪声
Industrial-process control valves - Part 8: Noise considerations - Section l: Laboratory measurement of noise generated by aerodynamic flow through control valves
N17 GB/T 9469.1 - 1988 分散型过程控制系统用工业过程数据公路总论
Process data highway, type C(PROWAY C), for distributed process control systems - - overview
N17 GB/T 9469.2 - 1988 分散型过程控制系统用工业过程数据公路功能要求
Process data high way, type C(PROWAY C), for distributed process control systems - Functional requirements
N17 GB/T 9469.3 - 1988 分散型过程控制系统用工业过程数据公路 与工业过程数据公路的接口
Process data highway, type C(PROWAY C), for distributed process control systems - The interface to PROWAY
N17 GB/T 9469.4 - 1988 分散型过程控制系统用工业过程数据公路工业过程数据公路链路控制(PLC)子层
Process data highway, type C(PROWAY C), for distributed process control systems - The PROWAY link control(PLC) sublayer
N17 GB/T 9469.5 - 1988 分散型过程控制系统用工业过程数据公路PLC-MAC接口和服务规范
Process data highway, type C(PROWAY C), for distributed process control systems - PLC-MAC inter-face and service specification
N17 GB/T 9469.6 - 1988 分散型过程控制系统用工业过程数据公路媒体送取控制(MAC)子层
Process data highway, type C(PROWAY C), for distributed process control systems-The medium access control(MAC) sublayer
N17 GB/T 9469.7 - 1988 分散型过程控制系统用工业过程数据公路MAC-物理层接口和规范
Process data highway, type C(PROWAY C), for distributed process control systems - MAC-physical layer interface specification
N17 GB/T 9469.8 - 1988 分散型过程控制系统用工业过程数据公路单信道相位连续FSK物理(PHY)层及其与媒体接口的规范
Process data highway, type C(PROWAY C), for distributed process control systems - Specification of the single channel phase-continuous-FKS physical (PHY)layer and its interface to the medium
N17 GB/T 9469.9 - 1988 分散型过程控制系统用工业过程数据公路单信道同轴电缆总线媒体“层”技术规范
Process data highway, type C(PROWAY C), for distributed process control systems - Single-channel coaxial-cable bus medium layer specification
N17 GB/T 9469.10 - 1988分散型过程控制系统用工业过程数据公路工业过程数据公路管理
Process data highway, type C(PROWAY C), for distributed process control systems - PROWAY management
N17 GB/T 16642 - 1996 计算机集成制造系统体系结构
Computer integrated manufacturing system architecture
N17 GB/T 17165.1 - 1997模糊控制装置和系统第l部分: 基本术语
Fuzzy control devices and systems - Part l: Fundamental terminology
N17 GB/T 17165.2 - 1997模糊控制装置和系统第2部分: 模糊控制单元性能检测一般要求
Fuzzy control devices and systems - Part 2: General requirements for evaluating performance of fuzzy control unit
N17 GB/T 17165.3 - 2001模糊控制装置和系统第3部分: 可编程控制器模糊控制编程
Fuzzy control devices and systems - Part 3: Programmable controllers - Fuzzy control programming
N17 GB/T 17165.4 - 1997模糊控制装置和系统第4部分: 洗衣机模糊控制基本性能检测要求
Fuzzy control devices and systems - Part4: Evaluation requirements of basic properties of fuzzy control for washing machine
N18 GB/T 3386 - 1988 工业过程测量和控制系统用电动和气动模拟记录仪和指示仪性能评定方法
Methods of evaluating the performance of electrical and pneumatic analog recorders and indicators for industrial-process measurement and control systems
N18 GB/T 9249 - 1988 工业过程测量和控制系统用自动平衡式记录仪和指示仪
Self-balance recorders and indicators for use in industrial-process measurement and control systems
N18 GB/T 13423 - 1992 工业控制用软件评定准则
Criteria for the evaluation of software used for industry control
N18 GB/T 15969.1 - 1995可编程序控制器第1部分: 通用信息
Programmable controllers - Part 1: General information
N18 GB/T 15969.2 - 1995可编程序控制器第2部分: 设备特性
Programmable controllers - Part 2: Equipment characteristics
N18 GB/T 15969.3 - 1995可编程序控制器第3部分: 编程语言
Programmable controllers - Part 3: Programming languages
N18 GB/T 15969.4 - 1995可编程序控制器第4部分: 用户导则
Programmable controllers - Part 4: User guidelines
N18 GB/T 15969.5 - 2002可编程序控制器第5部分: 通信
Programmable controllers - Part 5: Communications
N18 GB/T16656.202 - 2000工业自动化系统与集成产品数据的表达与交换第202部分: 应用协议: 相关绘图
Industrial automation systems and integration - Product data representation and exchange - Part02: Applicationprotocol: Associative draughting
N18 GB/T16656.520 - 2002工业自动化系统与集成产品数据的表达与交换第520部分: 应用解释构造: 相关绘图元素
Industrial automation systems and integration - Product data representation and exchange - Part 520: Application interpreted construct: Associative draughting elements
N18 GB/T 17645.20 - 2002工业自动化系统与集成零件库第20部分: 逻辑资源: 表达式的逻辑模型
Industrial automation systems and integration – Parts library - Part 20: Logical resource: Lo百cal model of
expressions
N18 GB/T 18975.1 - 2003工业自动化系统与集成流程工厂(包括石油和天然气生产设施)生命周期数据集成第1部分: 综述与基本原理
Industrial automation systems and integration - Integration of life-cycle data for process plants including on and gas production facilities - Part l: overview and fundamental principles
N18 GB/T 19150 - 2003 零件库术语
Part library terms
N18 GB/Z 19398 - 2003 工业自动化系统与集成离散部件制造设备在工业环境中的工作条件
Industrial automation systems and integration - operating conditions for discrete part manufacturing - equipment in industrial environments
Here are collected names of most common standards of China. If you found standard, that you are interesting in, we can obtain and translate it for you. If here are no standards, that you are looking for, feel free to request us, we will find a suitable one.

Price depends on the standard
Our contacts
mega@asia-business.biz
Chinese Standarts
Agriculture, Foresty
Medicine, Public Health
Mining Equipment
Petroleum
Energy Resources
Chemical Industry
Metallurgy
Machinary
Electrotechnology
Electronic Components
Communication
Instruments and meter
Engineering Construction
Building Materials
Higway and Waterway
Railway
Road Vehicles
Shipbuilding
Aviation, Spaceflight
Textiles