Metal-cutting machine tools

Content:
50 metal-cutting machine tools - general
51 parts of metal-cutting machine tools
52 ancillary components
53 lathe
54 drilling, boring, milling machine
55 Grinder
56 gears and screw machine
57 saber saw
58 combination of machine tools
59 special processing machine

J50 GB/T 3167-1993 金属切削机床操作指示形象化符号
Symbols for indications appearing On machine tools
J50 GB/T 3168-1993 数字控制机床操作指示形象化符号
Numerical control of machines-Symbols
J50 GB/T 4215-1984 金属切削机床噪声声功率级的测定
Determination of sound power levels of noise emitted by metal cutting machine tools
JS0 GB 5226. 1 - 2002 机械安全机械电气设备第l部分: 通用技术条件
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
J50 GB/T 5900. 1-1997 机床主轴端部与花盘互换性尺寸第l部分: A型
Machine tools - Spindle noses and face plates-Sizes for interchangeability - Part 1. Type A
JS0 GB/T5900. 2-1997 机床主轴端部与花盘互换性尺寸第2部分: 凸轮锁紧型
Machine tools-Spindle noses and face plates-Sizes for interchangeability - Part 2: Camlock type
J50 GB/T 5900. 3-1997 机床主轴端部与花盘互换性尺寸第3部分: 卡口型
Machine tools-spindle noses and face plates-Sizes for interchangeability - Part 3: Bayonet type
J50 GB/T 6477. 1-1986 金属切削机床术语基本术语
Terminology for metal-cutting machine tools-Basic terminology
J50 GB/T 6477. 2-1986 金属切削机床术语组合机床及组合机床自动线
Terminology for metal-cutting machine tools – Modular machine tools and transfer lines
J50 GB/T 6477. 3-1986 金属切削机床术语车床
Terminology for metal-cutting machine tools-lathes
J50 GB/T 6477. 4-1986 金属切削机床术语钻床
Terminology for metal-cutting machine tools-Drilling machines
J50 GB/T6477. 5-1986 金属切削机床术语镗床
Terminology for metal-cutting machine tools - Boring machines
J50 GB/T 6477. 6-1986 金属切削机床术语磨床
Terminology for metal-cutting machine tools-Grinding machines
J50 GB/T 6477. 7-1986 金属切削机床术语齿轮加工机床
Terminology for metal-cutting machine tools-Gear Cutting machines
J50 GB/T 6477. 8-1986 金属切削机床术语螺纹加工机床
Terminology for metal-cutting machine tools - Thread rag machines
J50 GB/T6477. 9-1986 金属切削机床术语铣床
Terminology for metal-cutting machine tools - Milling machines
J50 GB/T 6477. 10一1986金属切削机床术语刨床和插床
Terminology for metal-cutting machine tools-Planning and slotting machines
J50 GB/T6477. 11-1986金属切削机床术语拉床
Terminology for metal-cuing machine tools-Broaching machines
J50 GB/T 6477. 13-1986金属切削机床术语锯床
Terminology for metal-cutting machine tools-Sawing machines
J50 GB/T 6477. 14-1986金属切削机床术语刻线机
Terminology for metal-cutting machine tools-Dividing machines
J50 GB/T 6477. 15-1986金属切削机床术语管子加工机床
Terminology for metal-cutting machine tools-Pipe cutting machines
JS0 GB/T 6477. 16-1986金属切削机床术语机床附件
Terminology for metal-cutting machine tools-Machine tool accessory
J50 GB/T 6576 - 2602 机床润滑系统
Machine tools - Lubrication systems
JS0 GB/T 8870-1988 机床数字控制点位、直线运动和轮廓控制系统的数据格式
Numerical control of machines-Data format for positioning, line motion and contouring control sys-tents
J50 GB/T 9061-1988 金属切削机床通用技术条件
General specifications for metal-cutting machine tools
J50 GB/T 12217-1990 机器轴高
Machines - Shaft heights
J50 GB/T 13574-1992 金属切削机床静刚度检验通则
Metal-cutting machine tools-Test code for static rigidity
J50 GB/T 15375-1994 金属切削机床型号编制方法
Metal-cutting machine tools - Method of type designation
JS0 GB 15760 - 2004 金属切削机床安全防护通用技术条件
Metal-cutting machine tools-General safeguarding specification
JS0 GB/T 16768-1997 金属切削机床振动测量方法
Metal-cutting machine tools-Measurement method for vibration
JS0 GB/T 16769-1997 金属切削机床噪声声压级测量方法
Metal-cutting machine tools-Measurement method of sound pressure level
J50 GB/T 17161-1997 机床控制装置的操作方向
Machine tools - Direction of operation of controls
J50 GB/T 17162-1997 机床速度和进给量
Machine tools - - Speeds and feeds
J50 GB/T 17421. 1-1998机床检验通则第1部分: 在无负荷或精加工条件下机床的几何精度
Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
JSO GB/T 17421. 2 - 2000机床检验通则第2部分: 数控轴线的定位精度和重复定位精度的确定
Test code for machine tools-Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
J50 GB/T 17421. 4 - 2003机床检验通则第4部分: 数控机床的圆检验
Test code for machine tools～Part 4: Circular tests for numerically control led machine tools
J50 GB 18568 - 2601 加工中心安全防护技术条件
Machining centres-Safeguarding specification
J5l GB/T3837 - 2601 7: 24手动换刀刀柄圆锥
7/24 tapers for tool shanks for manual changing
J51 GB/T 17587. 1-1998滚珠丝杠副第l部分: 术语和符号
Ball screws-Part 1: Vocabulary and designation
J51 GB/T 17587. 2-1998滚珠丝杠副第2部分: 公称直径和公称导程公制系列
Ball screws - Part 2: Nominal diameters and nominal leads - Metric series
J51 GB/T 17587. 3-1998滚珠丝杠副第3部分: 验收条件和验收检验
Ball screws-Part 3: Acceptance conditions and acceptance tests
J52 GB/T 158-1996 机床工作台T形槽和相应螺栓
Machine tool tables - T-slots and corresponding bolts
J52 GB/T 2554. 1-1998 机械分度头精度检验
Mechanical dividing heads - Testing of accuracy
J52 GB/T 2554. 2-1998 机械分度头分类和技术条件
Mechanical dividing heads-Classifications and technical specifications
J52 GB/T4346. 1 - 2002 机床用手动自定心卡盘第1部分: 参数和技术要求
Self-centring manually-operated chucks for machine tools - Part 1: Dimensions and specifications
J52 GB/T4346. 2 - 2002 机床用手动自定心卡盘第2部分: 验收试验规范(几何精度检验)
Self-centring manually -operated chucks for machine tools - Part 2: Acceptance test specifications f geometrical tests)
J52 GB/T 6087 - 2003 扳手三爪钻夹头
Key type three jaw drill chucks
J52 GB/T 6090 - 2003 钻夹头圆锥
Drill chuck tapers
J52 GB/T9204. 1-1988 固定顶尖参数
Dead centre - Parameter
J52 GB/T9204. 2-1988 固定顶尖精度
Dead centre-Testing of the accuracy
J52 GB/T9204. 3-1988 固定顶尖技术条件
Dead centre-Specification
J52 GB/T 14534-1993 电磁吸盘
Electromagnetic chuck
J53 GB/T 1582-1993 卧式车床参数
General purpose parallel lathes-Parameters
J53 GB/T 4020-1997 卧式车床精度检验
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy
J53 GB/T 4683-1993 转塔车床精度
Turret lathes - Testing of the accuracy
J53 GB/T 5268-1985 车床刀架装刀槽高度
Machine tools-Lathe tool posts-Overall internal height
J53 GB/T 14535-1993 单轴自动车床精度
Single spindle automatic lathes-Testing of the accuracy
J53 GB/T 16462-1996 数控卧式车床精度检验
Numerically controlled turning machines - Testing of the accuracy
J54 GB/T 2813 - 2003 台式钻床参数
Bench drilling machines-Parameters
J-54 GB/T 2814 - 2003 立式钻床参数
Vertical Drilling machines - Parameters
J54 GB/T 2815 - 2003 钻床主轴端部
Drilling machines-spindle noses
J54 GB/T 3932-1983 工作台不升降铣床精度
Milling machines with table of fixed height with horizontal 0r vertical spindle-Testing of the accuracy
J54 GB/T3933. 2 - 2002 升降台铣床检验条件精度检验第2部分: 卧式铣床
Test conditions for milling machines with table of variable height - Testing of ace - Part 2: Machines with horizontal spindle
J54 GB/T3933. 3 - 2002 升降台铣床检验条件精度检验第8部分: 立式铣床
Test conditions for milling machines with table of variable height - Testing of accuracy - Part 3: Machines with vertical spindle
J54 GB/T 4017-1997 摇臂钻床精度检验
Radial drilling machines - Testing of the accuracy
J54 GB/T 4018. 1-1997 圆柱立式钻床精度检验第l部分: 几何精度检验
Pillar type vertical drilling machines - Testing of the accuracy - Part 1: Testing of the geometric accuracy
J54 GB/T 4018. 2-1997 圆柱立式钻床精度检验第2部分: 工作精度检验
Pillar type vertical drilling machines - Testing of the accuracy - Part 2: Testing of the working accuracy
J54 GB/T 4019. 1-1997 方柱立式钻床精度检验第1部分: 几何精度检验
Box type vertical drilling machines - Testing of the accuracy - Part 1: Geometrical tests
J54 GB/T 4019. 2-1997 方柱立式钻床精度检验第2部分: 工作精度检验
Box type vertical drilling machines - Testing of the accuracy - Part 2: Working tests
J54 GB/T 5289. 2 - 2000 卧式铣镗床检验条件精度检验第2部分: 台式机床
Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy-Part 2: Table type machines
J54 GB/T 9461 - 2003 摇臂钻床参数
Radial drilling machines-Parameters
J54 GB/T 14660-1993 数控坐标镗床精度
NC jig boring machine - Testing of the accuracy
J54 GB/T 18400. 6 - 2001加工中心检验条件第6部分: 进给率、速度和插补精度检验
Test conditions for macmnmg centres-Part 6: Accuracy of feeds. speeds and interpolations
J54 GB/T 18400. 8 - 2001加工中心检验条件第8部分: 三个坐标平面上轮廓特性的评定
Test conditions for machining centres - Part 8: Evaluation of the contouring performance in the three coordinate planes
J54 GB/T 19362. 1 - 2003龙门铣床检验条件精度检验第l部分: 固定式龙门铣床 ,
Machine tools – Test conditions for bridge-type milling Machines-Testing of the accuracy - Part 1: Fixed bridge(portal-type)machines
J55 GB/T 4022-1983 卧轴矩台平面磨床精度
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Testing of the accuracy
J55 GB4674-1984 磨削机械安全规程
Safety code for grinding machines
J55 GB/T 4681-1984 无心磨床精度
External cylindrical centerless grinding machines-Testing of the accuracy
J55 GB/T 4682-1984 内圆磨床精度
External cylindrical grinding machines with horizontal spindles-Testing of the accuracy
J55 GB/T4684-1994 外圆磨床参数
External cylindrical grinding machines-Parameters
J55 GB/T 4685-1994 外圆磨床精度
External cylindrical grinding machines-Accuracy
J55 GB/T 5288-1985 龙门导轨磨床精度
Slideways grinding machines with two columns-Testing of the accuracy
J55 GB/T 6469 - 2004 卧轴矩台平面磨床参数
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Parameters
J55 GB/T 6470 - 2004 无心外圆磨床参数
External cylindrical centerless grinding machines-Parameters
J55 GB/T 6471 - 2004 内圆磨床参数
internal cylindrical grinding machines-Parameters
J55 GB/T 6474-1986 导轨磨床参数
Surface grinding machines for grinding slideways-Parameters
J55 GB/T 6476-1986 立轴矩台平面磨床精度
Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Testing of the accuracy
J55 GB/T 7177-1987 双端面磨床参数
Double disc surface grinding machines-Parameters
J55 GB/T 7923 - 2004 立轴矩台平面磨床参数
Surface grinding machines with vertical grinding wheel spindle and reciprocating table-Parameters
J55 GB/T 7924 - 2004 光学曲线磨床参数
Optical projection profile grinding machines-Parameters
J55 GB/T 10927 - 2004 立轴圆台平面磨床参数
Surface grinding machines with vertical spindle and rotary table-Parameters
J55 GB/T 10930 - 2004 花键轴磨床参数
Splines shaft grinding machines-Parameters
J56 GB/T 8064-1998 滚齿机精度检验
Acceptance conditions for gear hobbing machines-Testing of the accuracy
J56 GB/T 9059-1988 精密插齿机精度
Precision gear shaping machines-Testing of the accuracy
J56 GB/T9167 - 2003 花键轴铣床精度检验
Spline hobbing machines-Testing of the accuracy
J56 GB/T 10173-1988 滚齿机参数
Gear hobbing machines-Parameters
J57 GB/T 4680一1997 卧式内拉床精度检验
Horizontal internal broaching machines-Testing of the accuracy
J57 GB/T 4686-1984 插齿机精度
Gear shaping machines - Testing of the accuracy
J57 GB/T 6472-1996 立式内拉床精度检验
Vertical internal broaching machines-Testing of the accuracy
J57 GB/T 6473-1996 立式外拉床精度检验
Vertical surface broaching machines - Testing of the accuracy
J57 GB/T 14302-1993 牛头刨床精度
shap啦machines - Testing of the accuracy
J58 GB/T 3668. 1-1983 组合机床通用部件多轴箱箱体和输入轴尺寸
Modular units for machine tool construction-Multi-spindle heads-Casing and input drive shaft dimen-sions
J58 GB/T 3668. 2-1983 组合机床通用部件支架尺寸
Modular units for machine tool construction-Support Brackets-Dimensions
J58 GB/T 3668. 3-1983 组合机床通用部件 回转工作台和回转工作台用多边形中间底座尺寸
Modular units for machine tool construction-Rotary tables and multi-sided centre bases for rotary tables-Dimensions
J58 GB/T3668. 4-1983 组合机床通用部件滑台尺寸
Modular units for machine tool construction-Slide Units-Dimensions
J58 GB/T 3668. 5-1983 组合机床通用部件动力箱尺寸
Modular units for machine tool construction-Head-stocks-Dimensions
J58 GB/T 3668. 6-1983 组合机床通用部件滑台侧底座尺寸
Modular units for machine tool construction - Wing bases for slide units - Dimensions
J58 GB/T 3668. 7-1983 组合机床通用部件 中间底座和立柱尺寸
Modular units for machine tool construction - Centre bases and columns - Dimensions
J58 GB/T3668. 8-1983 组合机床通用部件立柱侧底座尺寸
Modular units for machine tool construction-Wing base for columns-Dimensions
J58 GB/T 3668. 9-1983 组合机床通用部件主轴部件尺寸
Modular units for machine tool construction-Spindle units-Dimensions
J58 GB/T 3668. 10一1983组合机床通用部件多轴箱主轴端部和可调接杆尺寸
Modular units for machine tool construction-Spindle noses and adjustable adaptors for multi-spindle heads-Dimensions
J58 GB/T 3668. 11-1983组合机床通用部件有导轨立柱尺寸
Modular units for machine tool construction-Integral way columns-Dimensions
J58 GB/T 3668. 12-1983组合机床通用部件落地式有导轨立柱尺寸
Modular units for machine tool construction - Floor-mounted type-Integral way columns-Dimensions
J58 GB/T 3668. 13-1983组合机床通用部件安装多轴箱用的法兰盘和端面传动键尺寸
Modular units for machine tool construction-Tenon-drive and flanges for mounting multi-spindle heads-Dimensions
J59 GB/T 5290. 1 - 2001 电火花成形机参数第l部分: 单立柱机床(十字工作台型和固定工作台型)
Die sinking electro-discharge machines(EDM)-Parameters - Part l: Single column machines(cross slide table type and fixed table type
J59 GB/T 5290. 2 - 2003 电火花成形机参数第2部分: 双立柱机床(移动主轴头型和十字工作台型)
Die sinking electro-discharge machines(EDM)-Parameters Part 2: Two column machines(Slide-head type and CROSS slide table type)
J59 GB/T5291. 1 - 2001 电火花成形机精度检验第1部分: 单立柱机床(十字工作台型和固定工作台型)
Die sinking electro-discharge machines(EDM)-Testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type)
J59 GB/T 5291. 2 - 2003 电火花成形机精度检验第2部分: 双立柱机床(移动主轴头型和十字工作台型)
Die sinking electro-discharge machines(EDM)- Testing of accuracy Part 2: Two column machines (Slide-head type and cross- slide table type)
J59 GB/T 7925-1987 电火花线切割机参数
Parameters of wire cut electric discharge machines
J59 GB/T 7926-1987 电火花线切割机精度
Accuracy of wire cut electric discharge machines
J59 GB/T 14896. 1-1994特种加工机床术语基本术语
Non-traditional machine tools-Terminology-Basic terminology
J59 GB/T 14896. 2-1994特种加工机床术语放电加工机床
Non-traditional machine tools - Terminology-Electro-discharge machine tools
J59 GB/T 14896. 3-1994特种加工机床术语电解加工机床
Non-traditional machine tools-Terminology-Electrolytic machine tools
J59 GB/T 14896. 4-1994特种加工机床术语超声加工机床
Non-traditional machine tools-Terminology - Ultra-sonic machine tools
J59 GB/T 14896. 5-1994特种加工机床术语复合加工机床
Non-traditional machine tools-Terminology-Combined machining machine tools
J59 GB/T 14896. 6-1994特种加工机床术语其他特种加工机床
Non-traditional machine tools-Terminology-Other non-traditional machine tools
J59 GB/T 14896. 7 - 2004特种加工机床术语第7部分: 快速成形机床 t
Non-traditional machine tools-Terminology-Part 7:Rapid prototyping machines
J59 GB/T 19361 - 2003 电火花线切割机(单向走丝型) 精度检验
Wire electrical-discharge machines(Unidirectional traveling type - Testing of the accuracy)