Processing Technology

Content:
30 Processing Technology - general
31 Cast
32 forge and press
33 welding and cutting
36 Heat Treatment
38 cold Treatment Technology
39 special processing technology

J30 GB/T 4863-1985 机械制造工艺基本术语
General terminology of machine-building technology
J31 GB/T 1173-1995 铸造铝合金
Casting aluminium alloys
J31 GB/T 1174-1992 铸造轴承合金
cast bearing metals
J31 GB/T 1175-1997 铸造锌合金
Casting zinc alloys
J31 GB/T 1176-1987 铸造铜合金技术条件
Specification for cast copper alloys
J31 GB/T 1177-1991 铸造镁合金
Casting magnesium alloys
J31 GB/T 1348-1988 球墨铸铁件
Spheroidal graphite iron castings
J31 GB/T 2100 - 2002 一般用途耐蚀钢铸件
Corrosion-resistant steel castings for general applications
J31 GB/T 2684-1981 铸造用原砂及混合料试验方法
Foundry sands and sand mixtures for casting - Method of testing
J31 GB/T 3180-1982 中锰抗磨球墨铸铁件技术条件
Specification for medium manganese wear-resistant spheroidal iron castings
J31 GB/T 5611 - 1998 铸造术语
Foundry terminology
J31 GB/T 5613 - 1995 铸钢牌号表示方法
Code for representing cast steels
J31 GB/T 5614 - 1985 铸铁件热处理状态的名称、定义及代号
The designations, definitions and symbols for heat treatment tempers of iron castings
J31 GB/T 5615 - 1985 铸钢件热处理状态的名称、定义及代号
The designations, definitions and symbols for heat treatment tempers of steel castings
J31 GB/T 5677 - 1985 铸钢件射线照相及底片等级分类方法
Methods of radiographic testing and classification of radiographs for steel castings
J31 GB/T 5678 - 1985 铸造合金光谱分析取样方法
The method for sampling cast alloys for spectrochemical analysis
J31 GB/T 5680 - 1998 高锰钢铸件
Anstenitic manganese steel castings
J31 GB/T 6296 - 1986 灰铸铁冲击试验方法
Grey cast iron impact test
J31 GB/T 6414 - 1999 铸件尺寸公差与机械加工余量
Castings - System of dimensional tolerances and machining allowances
J31 GB/T 6967 - 1986 工程结构用中、高强度不锈钢铸件
Medium and high strength stainless steel castings for engineering structure purposes
J31 GB/T 7143 - 1986 铸造用硅砂化学分析方法
Methods for chemical analysis of silica sand for foundry
J31 GB/T 7216 - 1987 灰铸铁金相
Gray cast iron metallography
J31 GB/T 7233 - 1987 铸钢件超声探伤及质量评级方法
Methods for ultrasonic testing and for specifying quality levels of steel castings
J31 GB/T 7659 - 1987 焊接结构用碳素钢铸件
Carbon steel castings suitable for welded structure
J31 GB/T 8063 - 1994 铸造有色金属及其合金牌号表示方法
Designation of cast nonferrous metals and their alloys
J31 GB/T 8263 - 1999 抗磨白口铸铁件
Abrasion-resistant white iron castings
J31 GB/T 8491 - 1987 高硅耐蚀铸铁件
Corrosion resistant high silicon iron castings.
J31 GB/T 8492 - 2002 一般用途耐热钢和合金铸件
Heat-resistant steel and alloy castings for general applications
J31 GB/T 8493 - 1987 一般工程用铸造碳钢金相
Metallograph of cast carbon steels for general engineering purposes
J31 GB/T 9437 - 1988 耐热铸铁件
Heat resistant iron castings
J31 GB/T 9438 - 1999 铝合金铸件
Aluminium alloy castings
J31 GB/T 9439 - 1988 灰铸铁件
Grey iron castings
J31 GB/T 9440 - 1988 可锻铸铁件
Malleable iron castings
J31 GB/T 9441 - 1988 球墨铸铁金相检验
Metallographic test for spheroidal graphite cast iron
J31 GB/T9442 - 1998 铸造用硅砂
Foundry silica sand
J31 GB/T 11351 - 1989 铸件重量公差
Mass tolerances for castings
J31 GB/T 11352 - 1989 一般工程用铸造碳钢件
Carbon steel castings for general engineering purposes
J31 GB/T 12214 - 1990 熔模铸造用硅砂、粉
Silica sand and flour for investment casting
J31 GB/T 12215 - 1990 熔模铸造用铝矾土砂、粉
Bauxite sand and flour for investment casting
J31 GB/T 12216 - 1990 铸造用合脂粘结剂
The residue from distillation of synthetic fatty acids as binder for foundry
J31 GB/T 13818 - 1992 压铸锌合金
Zinc die-casting alloys
J31 GB/T 13819 - 1992 铜合金铸件
Copper alloy castings
J31 GB/T 13820 - 1992 镁合金铸件
Magnesium alloy casl2ngs
J31 GB/T 13821 - 1992 锌合金压铸件
Zinc alloy die castings
J31 GB/T 13822 - 1992 压铸有色合金试样
Test specimens for non-ferrous die-casting alloys
J31 GB/T 13925 - 1992 铸造高锰钢金相
Metallographs for high manganese cast steel
J31 GB/T 14235. 1 - 1993熔模铸造模料熔点测定方法(冷却曲线法)
Testing method for melting point of pattern materials in investment casting
J31 GB/T 14235. 2 - 1993熔模铸造模料抗弯强度测定方法
Testing method for bending strength of pattern materials in investment casting
J31 GB/T 14235. 3 - 1993熔模铸造模料灰分测定方法
Testing methods for ash content of pattern materials in investment casting
J31 GB/T 14235. 4-1993熔模铸造模料线收缩率测定方法
Testing method for linear contraction of pattern materials in investment casting
J31 GB/T 14235. 5-1993熔模铸造模料表面硬度测定方法
Testing method for surface hardness of pattern materials in investment casting
J31 GB/T 14235. 6-1993熔模铸造模料酸值测定方法
Testing method for acid number of pattern materials in investment casting
J31 GB/T 14235. 7-1993熔模铸造模料流动性测定方法
Testing method for fluidity of pattern materials in investment casting
J31 GB/T 14235. 8-1993熔模铸造模料粘度测定方法
Testing method for viscosity of pattern materials in investment casting
J31 GB/T 14235. 9-1993熔模铸造模料热稳定性测定方法
Testing method for thermal stability of pattern materials in investment casting
J31 GB/T 14408-1993 一般工程与结构用低合金铸钢件
Low alloy steel castings for general engineering and structural purposes
J31 GB/T 15056-1994 铸造表面粗糙度评定方法
Evaluation method on cast surface roughness
J31 GB/T 151 14-1994 铝合金压铸件
Aluminium alloy die-castings
J31 GB/T 15115-1994 压铸铝合金
Die casting aluminium alloys
J31 GB/T 15116-1994 压铸铜合金
Dm casting copper alloys
J31 GB/T. 15117-1994 铜合金压铸件
Copper alloy die castings
J31 GB/T 16253-1996 承压钢铸件
Steel castings for pressure purposes
J31 GB/T 16746-1997 锌合金铸件
Zinc alloy castings
J31 GB/T 17445-1998 铸造磨球
Cast grinding bans
J32 GB/T 8541-1997 锻压术语
Terminology of forging and stamping
J32 GB/T 12361 - 2003 钢质模锻件通用技术条件
General specification of steel die forgings
J32 GB/T 12362 - 2003 钢质模锻件公差及机械加工余量
Tolerances and machining - Allowances of steel die forgings
J32 GB/T 12363-1990 锻件功能分类
Classification of forging functions
J32 GB/T 13320-1991 钢质模锻件金相组织评级图及评定方法
Metallographic grading atlas and assessing method for steel die forgings
J32 GB/T 13914-2002 冲压件尺寸公差
Tolerance of dimensions for stampings
J32 GB/T 13915-2002 冲压件角度公差
Tolerance of angles for stampings
J32 GB/T 13916 - 2002 冲压件形状和位置未注公差
Unnoted tolerance of shape and position for stampings
J32 GB/T 15055-1994 冲压件未注公差尺寸极限偏差
Permissible stamping varitions m dimensions without tolerance indication
J32 GB/T 15825. 1-1995金属薄板成形性能与试验方法成形性能和指标
Sheet metal formability and test methods – Formability and indexes
J32 GB/T 15825. 2-1995金属薄板成形性能与试验方法通用试验规程
Sheet metal formability and test methods - General test rules
J32 GB/T 15825. 3～1995金属薄板成形性能与试验方法拉深与拉深载荷试验
Sheet metal formability and test methods - Drawing and drawing load test
J32 GB/T 15825. 4-1995金属薄板成形性能和试验方法扩孔试验
Sheet metal formability and test methods - Hole expanding test
J32 GB/T 15825. 5-1995金属薄板成形性能与试验方法弯曲试验
Sheet metal formability and test methods - Bending test
J32 GB/T 15825. 6-1995金属薄板成形性能与试验方法锥杯试验
Sheet metal formability and test methods - Conical cup test
232 GB/T 15825. 7-1995金属薄板成形性能与试验方法凸耳试验
Sheet metal formability and test methods - Earing test
J32 GB/T 15825-8-1995金属薄板成形性能与试验方法成形极限图(FLD)试验
Sheet metal formability and test methods - Forming limit diagram(FLD)test
J32 GB/T 15826. 1-1995锤上钢质自由锻件机械加工余量与公差一般要求
Machining allowances and tolerances for steel open die forgings on hammer - General requirement
J32 GB/T 15826. 2-1995锤上钢质自由锻件机械加工余量与公差盘、柱类
Machining allowances and tolerances for steel open die forgings 0n hammer - Disks and columns
J32 GB/T 15826. 3-1995锤上钢质自由锻件机械加工余量与公差带孔圆盘类
Machining allowances and tolerances for steel open die forgings on hammer - Disk swith holes
J32 GB/T 15826. 4-1995锤上钢质自由锻件机械加工余量与公差圆环类
Machining allowances and tolerances for steel open die forgings on hammer - Rings
J32 GB/T 15826. 5-1995锤上钢质自由锻件机械加工余量与公差套筒类
Machining allowances and tolerances for steel open die forgings on hammer - Seamles cylinder hllshings
J32 GB/T 15826. 6 - 1995锤上钢质自由锻件机械加工余量与公差光轴类
Machining allowances and tolerances for steel open die forgings on hammer - Shaft without steps
J32 GB/T 15826. 7 - 1995锤上钢质自由锻件机械加工余量与公差台阶轴类
Machining allowances and tolerances for steel open die forgings on hammer - Shaft with steps
J32 GB/T 15826. 8 - 1995锤上钢质自由锻件机械加工余量与公差单拐曲轴类
Machining allowances and tolerances for steel open die forgings on hammer - Single throw crankshaft
J32 GB/T 15826. 9 - 1995锤上钢质自由锻件机械加工余量与公差黑皮锻件
Machining allowances and tolerances for steel open die forgings on hammer - Forging without machining
J32 GB/T16743 - 1997 冲裁间隙
Blanking clearance
J33 GB/T 983 - 1995 不锈钢焊条
Stainless steel covered electrodes
J33 GB/T 984 - 2001 堆焊焊条
Hard facing electrodes for shielded metal arc welding
J33 GB/T 985 - 1988 气焊、手工电弧焊及气体保护焊焊缝坡口的基本形式与尺寸
Basic forms and sizes of weld grooves for gas welding, manual arc welding and gas-shielded arc welding
J33 GB/T 986 - 1988 埋弧焊焊缝坡口的基本形式和尺寸
Basic forms and sizes of weld grooves for submerged arc welding
J33 GB/T 1954 - 1980 铬镍奥氏体不锈钢焊缝铁素体含量测量方法
Determination of the weldign seam iron element con-tent in chromium, nickel anstenitic stainless steel
J33 GB/T 2649 - 1989 焊接接头机械性能试验取样方法
Methods of sampling for mechanical properties tests of welded joint
J33 GB/T 2650 - 1989 焊接接头冲击试验方法
Method of impact test for welded joint
J33 GB/T 2651 - 1989 焊接接头拉伸试验方法
Method of tensile test for welded joint
J33 GB/T 2652 - 1989 焊缝及熔敷金属拉伸试验方法
Method of tensile tests for weld and deposited metal
J33 GB/T 2653 - 1989 焊接接头弯曲及压扁试验方法
Methods of bend and compression tests for welded joint
J33 GB/T 2654 - 1989 焊接接头及堆焊金属硬度试验方法
Methods of hardness tests for welded joint and surfacing metal
J33 GB/T 2655 - 1989 焊接接头应变时效敏感性试验方法
Method of strain-age sensibility test for welded joint
J33 GB/T 2656 - 1981 焊缝金属和焊接接头的疲劳试验法
Weld beads metal and welded joint - Fatigue tests
J33 GB/T 3375 - 1994 焊接术语
Welding terminology
J33 GB/T3669 - 2001 铝及铝合金焊条
Aluminium and aluminium-alloy electrodes for shielded metal arc welding
J33 GB/T 3670-1995 铜及铜合金焊条
Coated. electrodes for copper and copper alloys
J33 GB/T 3731-1983 涂料焊条效率、金属回收率和熔敷系数的测定
Covered electrodes-Determination of the efficiency. metal recovery and deposition coefficient
J33 GB/T 3965-1995 熔敷金属中扩散氢测定方法
Methods for determination of diffusible hydrogen in deposited metal
J33 GB/T 4675. 1-1984 焊接性试验斜Y型坡口焊接裂纹试验方法
Weldability testing - Method of Y-groove cracking test
J33 GB/T 4675. 2-1984 焊接性试验搭接接头(CTS)焊接裂纹试验方法
Weldability testing - Method of controlled thermal severity cracldng test
J33 GB/T 4675. 3-1984 焊接性试验T型接头焊接裂纹试验方法
Weldability testing - Method of cracking test for welded tee joint
J33 GB/T 4675. 4-1984 焊接性试验压板对接(FISCO)焊接裂纹试验方法
Weldability testing - Method of FISCO cracking test
J33 GB/T 4675. 5-1984 焊接性试验焊接热影响区最高硬度试验方法
Weldability testing - Testing method of maximum hardness i11 weld heat-affected zone
J33 GB/T 51 17-1995碳钢焊条
Carbon steel covered electrodes
J33 GB/T 5118-1995 低合金钢焊条
Low alloy steel covered electrodes
J33 GB/T 5185-1985 金属焊接及钎焊方法在图样上的表示代号
Welding, brazing, braze welding and soldering of metals - List of processes for symbolic representation on drawings
J33 GB/T 5293-1999 埋弧焊用碳钢焊丝和焊剂
Carbon steel electrodes and fluxs for submerged arc welding
J33 GB/T 6208-1995 钎料型号表示方法
Filler metal for soft soldering and brazing - Designation
J33 GB/T 6416-1986 影响钢熔化焊接头质量的技术因素
Technical factors influencing the quality of the fusion welded joints in steel
J33 GB/T 6417-1986 金属熔化焊焊缝缺陷分类及说明
Classification of imperfections m metallic fusion welds, with explanations
J33 GB/T6418-1993 铜基钎料
Copper base brazing filler metals
J33 GB/T 7032-1986 T型角焊接头弯曲试验方法
Method of bend test for T type fillet welde djoint
J33 GB/T 8012 -2000 铸造锡铅焊料
Casting tin-lead solders
J33 GB/T 8110 - 1995 气体保护电弧焊用碳钢、低合金钢焊丝
Welding wires for gas shielding arc welding of carbon and low alloy steels
J33 GB/T 8454 - 1987 焊条用还原钛铁矿粉中亚铁量的测定
Determination of ferrous iron content in reduced ilmenite powder for welding rod
J33 GB/T 8619 - 1988 钎缝强度试验方法
Method of the strength test for brazed and soldered seam
J33 GB/T 9446 - 1988 焊接用插销冷裂纹试验方法
Welding - Cold cracking test method using implants
J33 GB/T 9447 - 1988 焊接接头疲劳裂纹扩展速率试验方法
Test method for fatigue crack growth rates of welded jdints
J33 GB 9448 - 1999 焊接与切割安全
Safety in welding and cutting
J33 GB/T 9460 - 1988 铜及铜合金焊丝
Welding wire and rods of copper and copper alloys
J33 GB/T 10044 - 1988 铸铁焊条及焊丝
Covered electrodes and welding rods for welding cast iron
J33 GB/T 10045 - 2001 碳钢药芯焊丝
Carbon steel flux cored electrodes for arc welding
J33 GB/T 10046 - 2000 银钎料
Silver filler metals for brazing
J33 GB/T10858 - 1989 铝及铝合金焊丝
Aluminium and aluminium alloy welding rods and wires
J33 GB/T 10859一1989 镍基钎料
Nickel base brazing filler metals
J33 GB/T 1 1363 - 1989 钎焊接头强度试验方法
Methods of the strength tests for brazed and soldered joint
J33 GB/T 1 1364 - 1989 钎料铺展性及填缝性试验方法
Test method of spreadability and clearance filling ability for filler metal
J33 GB/T 12467.1 - 1998焊接质量要求金属材料的熔化焊第l部分: 选择及使用指南
Quanty requirements for welding - Fusion welding of metallic materials - Part 1: Guidelines for selection and use
J33 GB/T 12467. 2 - 1998焊接质量要求金属材料的熔化焊第2部分: 完整质
量要求
Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements
J33 GB/T 12467. 3-1998焊接质量要求金属材料的熔化焊第3部分: 一般质量要求
Quality requirements for welding-Fusion welding of metallic materials - Part 3: Standards quality requirements
J33 GB/T 12467. 4-1998焊接质量要求金属材料的熔化焊第4部分: 基本质量要求
Quality requirements for welding - Fusion welding of metallic materials-Part 4: Elementary quality requirements
J33 GB/T 12469-1990 焊接质量保证钢熔化焊接头的要求和缺陷分级
Quality assurance of welding-Requirement for fusion welding joint of steel and classification for impeffection
J33 GB/T 12470 - 2903 埋弧焊用低合金钢焊丝和焊剂
Low-alloy steel electrodes and fluxes for submerged arc welding
J33 GB 12935-1991 焊条烘干炉运行能耗标准
Energy consumption standard in operation of covered electrode furnace
J33 GB/T 13311-1991 锅炉受压元件焊接接头机械性能试验方法
Boiler pressure parts - Mechanical test for welded joints
J33 GB/T 13450-1992 对接焊接头宽板拉伸试验方法
Method of wide plate tension test for butt welded joint
J33 GB/T 13679-1992 锰基钎料
Manganese base brazing filler metals
J33 GB/T 13814-1992 镍及镍合金焊条
Nickel and nickel alloy covered welding electrodes
J33 GB/T 13815-1992 铝基钎料
Aluminium base brazing filler metals
J33 GB/T 13816-1992 焊接接头脉动拉伸疲劳试验方法
Test method for pulsed tensile fatigue of welded joints
J33 GB/T 13817-1992 对接接头刚性拘束焊接裂纹试验方法
Method of rigid restraint cracking test for welding buttjoint
J33 GB/T 15111-1994 点焊接头剪切拉伸疲劳试验方法
Test method for shear tensile fadgue of spot welded joints
J33 GB/T 15169 - 2003 钢熔化焊焊工技能评定
Qualification test of welders-Fusion welding for steels
J33 GB/T 15620-1995 镍及镍合金焊丝
Nickel and nickel alloy welding wires
J33 GB/T 15747-1995 正面角焊缝接头拉伸试验方法
Method of tension test for front fillet welded joint
J33 GB/T 15829. 1-1995软钎焊用钎剂分类、标记与包装
Soldering fluxes - Classification, labelling and packaging
J33 GB/T 15829. 2-1995软钎焊用钎剂树脂类钎剂
Soldering fluxes-Resin basis fluxes
J33 GB/T 15829. 3-1995软钎焊用钎剂有机物类钎剂
Soldering fluxes-Organic fluxes
J33 GB/T 15829. 4-1995软钎焊用钎剂无机物类钎剂
Soldering fluxes-Inorganic fluxes
J33 GB/T 16672-1996 焊缝工作位置倾角和转角的定义
Welds-Working positions-Definitions of angles of slope and rotation
J33 GB/T 16957-1997 复合钢板焊接接头力学性能试验方法
Mechanical tests 0n welded joints in clad plates
J33 GB/T 17493-1998 低合金钢药芯焊丝
Low alloy steel flux cored electrodes for arc welding
J33 GB/T 17853-1999 不锈钢药芯焊丝
Stainless steel flux cored wires
J33 GB/T 17854-1999 埋弧焊用不锈钢焊丝和焊剂
Stainless steel electrodes and firms for submerged arc welding
J33 GB/T 18591 - 2001 焊接预热温度、道间温度及预热维持温度的测量指南
Welding-Guidance on the measurement of prehearing temperature, interpass temperature and preheat maintenance temperature
233 GB/T 19418 - 2003 钢的弧焊接头缺陷质量分级指南
Arc-welded joints in steel-Guidance on quality level for imperfections
233 GB/T 19419 - 2003 焊接管理任务与职责
Welding coordination - Tasks and responsibilities
236 GB/T 7232-1999 金属热处理工艺术语
Terminology of metal heat treatment
236 GB/T 8121 - 2002 热处理工艺材料术语
The terminology of technological materials for heat treatment
236 GB/T 9450-1988 钢件渗碳淬火有效硬化层深度的测定和校核
Determination and verification of the effective depth of carburizod and hardened cases of steel parts
236 GB/T 9451-1988 钢件薄表面总硬化层深度或有效硬化层深度的测定
Determination of total or effective thickness of thin surface hardened layers of steel parts
236 GB/T 9452 - 2003 热处理炉有效加热区测定方法
Testing method for work zone of heat treatment furnace
236 GB/T 11354-1989 钢铁零件渗氮层深度测定和金相组织检验
Steel-iron parts-Determination of nitrided case depth and metallographic examination of nitriding structure
236 GB/T 12603-1990 金属热处理工艺分类及代号
Classification and designation on metal heat treatment
J36 GB 15735 - 2004 金属热处理生产过程安全卫生要求
Requirements for the safety and health in production process of metal heat treatment
J36 GB/T 16923-1997 钢件的正火与退火
Normalizing and annealing of steel parts
J36 GB/T 16924-1997 钢件的淬火与回火
Quenching and tempering of steel parts
J36 GB/T 18177 - 2000 钢件的气体渗氮
Gas nitriding of steel parts
J39 GB/Z 18462 - 2001 激光加工机械金属切割的性能规范与标准检查程序
Laser processing machines-Performance specifications and benchmarks for cutting of metals