Machinary - general

Content:
00 standardization, quality management
01 technology management
02 economic management
04 based on common standards and methods
05 general technology
07 electronic computer applications
08 logo, packaging, transportation, storage
09 health, safety, labor protection

J01 GB/T 6419-1986 潜水焊工考试规则
Regulations for the qualification test of diver-welders
J01 GB/T 10201-1988 热处理合理用电导则
Guides for the rationality of electricity usage in heat treatment
J01 GB/T 11056-1989 锻造生产能源消耗标准
Energy consumption standard in forging production
J01 GB/T 11057-1989 离心式、混流式、轴流式水泵运行管理
Operational management of centrifugal, mixed flow and axial pumps
J04 GB/T 3-1997 普通螺纹收尾、肩距、退刀槽和倒角
Run-outs, undercuts and chamfers for general purpose metric screw threads
J04 GB/T 131-1993 机械制图表面粗糙度符号、代号及其注法
Mechanical drawings - Surface roughness symbols and methods of indicating
J04 GB/T 157 - 2001 产品几何量技术规范(GPS) 圆锥的锥度与锥角系列
Geometrical product specifications(GPS)一Series of conical tapers and taper angles
J04 GB/T 192 - 2003 普通螺纹基本牙型
General purpose metric screw threads - Basic profile
J04 GB/T 193 - 2003 普通螺纹直径与螺距系列
General purpose metric screw threads-General plan
J04 GB/T 196 - 2003 普通螺纹基本尺寸
General purpose metric screw threads - Basic dimensions
J04 GB/T 197 - 2003 普通螺纹公差
General purpose metric screw threads - Tolerances
J04 GB/T 324-1988 焊缝符号表示法
Welds-symbolic representation on drawings
J04 GB/T 1031-1995 表面粗糙度参数及其数值
Surface roughness - Parameters and their values
J04 GB/T 1167-1996 过渡配合螺纹
The threads for transition fit
J04 GB/T1181 - -1998 过盈配合螺纹
The interference-fit threads
J04 GB/T 1182-1996 形状和位置公差通则、定义、符号和图样表示法
Geometrical tolerance - Generalities, definitions, symbols, indications on drawings
J04 GB/T 1184-1996 形状和位置公差未注公差值
Geometrical tolerance - Geometrical tolerance for features without individual tolerance indications
J04 GB/T 1414 - 2003 普通螺纹管路系列
General purpose metric screw threads - The plan for pipe systems
J04 GB/T1415-1992 米制锥螺纹
Metric tape screw thread
J04 GB/T 1570-1990 圆锥形轴伸
Conical shaft ends
J04 GB/T 1800. 1-1997 极限与配合基础第1部分: 词汇
Limits and fits - Bases - Part 1: Terminology
J04 GB/T 1800. 2-1998 极限与配合基础第2部分: 公差、偏差和配合的基本规定
Limits and fits - Bases - Part 2: Basic rules of tolerances, deviations and fits
J04 GB/T 1800. 3-1998 极限与配合基础第3部分: 标准公差和基本偏差数值表
Limits and fits - Bases - Part 3: Numerical values tables of standard tolerances and fundamental deviations
J04 GB/T 1800. 4-1999 极限与配合标准公差等级和孔、轴的极限偏差表
Limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
J04 GB/T 1801-1999 极限与配合公差带和配合的选择
Limits and fits - Selection of tolerance zones and fits
J04 GB/T1803 - 2003 极限与配合尺寸至18 nun孔、轴公差带
Limits and fits - Tolerance zones for holes and shafts size up to 18ram
J04 GB/T 1804 - 2000 一般公差未注公差的线性和角度尺寸的公差
General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
J04 GB/T 1958 - 2004 产品几何量技术规范(GPS) 形状和位置公差检测规定
Geometrical Product Specifications(GPS)一Geometrical tolerance - Verification prescription
J04 GB/T 2298-1991 机械振动与冲击术语
Mechanical vibration and shock - Terminology
J04 GB/T 2358-1994 金属材料裂纹尖端张开位移试验方法
Test method for crack-tip opening displacement measurement of metallic materials
J04 GB/T 2516 - 2003 普通螺纹极限偏差
General purpose metric screw threads - Limit deviations
J04 GB/T 3177-1997 光滑工件尺寸的检验
Inspection of plain work piece sizes
J04 GB/T 3323-1987 钢熔化焊对接接头射线照相和质量分级
Methods for radio graphic inspection and classification of radiographs for fusion welded buttons in steel
J04 GB/T 3505 - 2000 产品几何技术规范表面结构 轮廓法 表面结构的术语、定义及参数
Geometrical Product Specifications(GPS)一Surface texture: Profile method - Terms, definitions and surface texture parameters
J04 GB/T 4096 - 2001 产品几何量技术规范(GPS) 棱体的角度与斜度系列
Geometrical product specifications(GPS)一Series of angler and slopes on prisms
J04 GB/T 4133-1984 莫氏圆锥的强制传动型式及尺寸
The type and dimensions for positive drive of Morse tapers
J04 GB/T 4249-1996 公差原则
Tolerance principle
J04 GB/T 4380 - 2004 圆度误差的评定两点、三点法
Assessment of departure from roundness - Two-and three-point methods
J04 GB/T4457. 2 - 2003 技术制图图样画法指引线和基准线的基本规定
Technical drawing - - Drawing presentation - General principles of leader lines and reference lines
J04 GB/T4457. 4 - 2002 机械制图图样画法图线
Mechanical drawings - General principles of presentation - Lines
J04 GB/T 4457. 5-1984 机械制图剖面符号
Mechanical drawings - - Symbols for sections
J04 GB/T4458. 1 - 2002 机械制图图样画法•视图
Mechanical drawings - General principles of presentation - Views
J04 GB/T 4458. 2 - 2003 机械制图装配图中零、部件序号及其编排方法
Mechanical drawings - Item references and its arrangement for assembling drawings
J04 GB/T 4458. 3-1984 机械制图轴测图
Mechanical drawings - Axonometric drawings
J04 GB/T 4458. 4 - 2003 机械制图尺寸注法
Mechanical drawings - Dimensioning
J04 GB/T4458. 5 - 2003 机械制图尺寸公差与配合注法
Mechanical drawings - Indication of tolerances for size and of fits
J04 GB/T4458. 6 - 2002 机械制图图样画法剖视图和断面图
Mechanical drawings - General principles preenstion - Sections
J04 GB/T 4459. 1-1995 机械制图螺纹及螺纹紧固件表示法
Mechanical drawings - Representation of screw threads and threaded parts
J04 GB/T4459. 2 - -2003 机械制图齿轮表示法
Mechanical drawings-Conventional representation of gears
J04 GB/T 4459. 3 - 2000 机械制图花键表示法
Mechanical drawings - Representation of splines
J04 GB/T 4459. 4 - 2003 机械制图弹簧表示法
Mechanical drawings - Convention representation of springs
J04 GB/T 4459. 5-1999 机械制图中心孔表示法
Mechanical drawings - Representation of centre holes
J04 GB/T 4459. 6-1996 机械制图动密封圈表示法
Mechanical drawings - Representation of seals for dynamic application
J04 GB/T 4459. 7-1998 机械制图滚动轴承表示法
Mechanical drawings-Representation of rolling bearings
J04 GB/T 4460-1984 机械制图机构运动简图符号
Mechanical drawings - Graphical symbols for kinematic diagrams
J04 GB/T 4656. 1 - 2000 技术制图棒料、型材及其断面的简化表示法
Technical drawings - Simplified representation of bars and profile sections
J04 GB/T 4974-1989 压缩机、凿岩机械与气动工具优先压力
Compressors, rock drming machines and pneumatic tools - Preferred pressures
J04 GB/T 5371 - 2004 极限与配合过盈配合的计算和选用
Limits and fits - The calculation and selection of interference fits
J04 GB/T 5796. 1-1986 梯形螺纹牙型
Metric trapezoidal SCreW threads - Profile
J04 GB/T 5796. 2-1986 梯形螺纹直径与螺矩系列
Metric apezoidal screw threads-System of diameter and pitch
J04 GB/T 5796. 3-1986 梯形螺纹基本尺寸
Metric trapezoidal SCreW threads - Basic dimensions
J04 GB/T 5796. 4-1986 梯形螺纹公差
Metric trapezoidal SCreW threads - Tolerances
J04 GB/T 5847 - 2004 尺寸链计算方法
Dimensional chain - Methods 0f calculation分:
J04 GB/T 6075. 1-1999 在非旋转部件上测量和评价机器的机械振动 第l部总则
Mechanical vibration - Evaluation 0f machine vibration by measurements on non-rotating parts - Part l: General guidelines
J04 GB/T 6075. 2 - 2002 在非旋转部件上测量和评价机器的机械振动第2部分: 50MW以上陆地安装的大型汽轮发电机组
Mechanical vibration - Evaluation 0f machine vibration by measurements on non-rotating parts-Part 2: Large land-based sh turbine generator sets. in excess of 50MW
J04 GB/T 6075. 3 - 2001 在非旋转部件上测量和评价机器的机械振动 第3部分: 额定功率大于15kW额定转速在120r/rain至15000r/rain之间的在现场测量的工业机器
Mechanical vibration - Evaluation of machine vibration by measurements 0n non-rotating parts - Part 3: Industrial machines with nominal power above 15kW and nominal speeds between 120r/rain and 15000r/rain when measured in situ
J04 GB/T6075. 4 - 2001 在非旋转部件上测量和评价机器的机械振动第4部分: 不包括航空器类的燃气轮机驱动装置.
Mechanical vibration - Evaluation 0f machine vibration by measurements on non-rotating parts-Part 4: Gas turbine driven sets excluding aircraft derivatives
J04 GB/T6075. 5 - 2002 在非旋转部件上测量和评价机器的机械振动第5部分: 水力发电厂和泵站机组
Mechanical vibration - Evaluation of machine vibration by measurements on non-m1州ng parts-Part 5: Machine sets in hydraulic power generating and pumping plants
J04 GB/T 6075. 6 - 2002 在非旋转部件上测量和评价机器的机械振动第6部分: 功率大于100kW的往复式机器
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts-Part 6: Reciprocating machines with power ratings above100kW
J04 GB/T 6404-1986 齿轮装置噪声声功率级测定方法
Determination of sound power level for noise emitted by gear units
J04 GB/T 6444-1995 机械振动平衡术语
Mechanical vibration - Balancing vocabulary
J04 GB/T 6557-1999 挠性转子机械平衡的方法和准则
Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors
J04 GB/T 6567. 1-1986 管路系统的图形符号基本原则
Graphical symbols for piping Systems - Basic principies
J04 GB/T 6567. 2-1986 管路系统的图形符号管路
Graphical symbols for piping systems - Piping
J04 GB/T6567. 3-1986 管路系统的图形符号管件
Graphical symbols for piping systems-piping accessories
J04 GB/T 6567. 4-1986 管路系统的图形符号阀门和控制元件
Graphical symbols for piping systems - Valves and control regulation actuators
J04 GB/T 6567. 5 - 2003 管路系统的图形符号管路、管件和阀门等图形符号的轴测图画法
Graphical symbols for piping systems - Axonometric representation 0f graphical symbols for piping, piping accessories and valves etc
J04 GB/T 7220 - 2004 产品几何量技术规范(GPS)表面结构轮廓法表面粗糙度术语参数测量
Geometrical Product Specifications(GPS)一Surface texture: Profile method - Surface roughness - Terminology - Measurement of surface roughness parameters
J04 GB/T 7221-1987 现场平衡设备的说明和评价
Field balancing equipment - Description and evaluation
J04 GB/T 7234 - 2004 产品几何量技术规范(GPS) 圆度测量术语、定义及参数
Geometrical Product Specifications(GPS) - Measurement of roundness - Terms. definitions and parameters of roundness
J04 GB/T 7235 - 2004 产品几何量技术规范(GPS) 评定圆度误差的方法半径变化量测量
Geometrical Product Specifications(GPS) - Methods for the assessment of departure from roundness-Measurement of variations in radius
J04 GB/T 7306. 1 - 2000 55。密封管螺纹第l部分: 圆柱内螺纹与圆锥外螺纹
Pipe threads with 55 degree thread an殂e where pres-sure-tight joints are made on the threads - Partl: Parallel internal and taper external threads
J04 GB/T 7306. 2 - 2000 55。密封管螺纹第2部分: 圆锥内螺纹与圆锥外螺纹
Pipe threads with 55 degree thread angle where pres-sure-tight joints are made 0n the threads-Part 2: Taper internal and external threads
J04 GB/T 7307 - 2001 55。非密封管螺纹
Pipe threads with 55 degree thread angle where pres-sure-tight joints are not made on the threads
J04 GB/T 7559-1987 纤维增强塑料层板螺栓连接挤压强度试验方法
FRP laminates - Test method for bearing strength by bolted joints
J04 GB/T 7700-1987 x射线应力测定方法
Residual stress measurement by X-ray
J04 GB/T 8069-1998 功能量规
Functional gauges
J04 GB/T 8540-1987 振动与冲击隔离器确定特性要求导则
Vibration and shock - Isolators - Procedure for specifying characteristics
J04 GB/T 8543-1987 验收试验中齿轮装置机械振动的测定
Determination 0f mechanical vibrations of gear units during acceptance testing
J04 GB/T 9144 - 2003 普通螺纹优选系列
General purpose metric screw threads-Preferable plan
J04 GB/T 9145 - 2003 普通螺纹中等精度、优选系列的极限尺寸
General purpose metric screw threads-Limits of sizes for the screW threads of medium quality and preferable plan
J04 GB/T 9145 - 2003 普通螺纹粗糙精度、优选系列的极限尺寸
General purpose metric SCreW threads-Limits of sizes for the screw threads 0f coarse quality and preferable plan
J04 GB/T 9443-1988 铸钢件渗透探伤及缺陷显示迹痕的评级方法
Methods of liquid penetrate testing and classification of indication for steel castings
J04 GB/T 9444-1988 铸钢件磁粉探伤及质量评级方法
The methods for magnetic particle testing and for specifying quality levels of steel castings
J04 GB/T 9445-1999 无损检测人员资格鉴定与认证
Qualification and artification for nondestructive testing personnel
J04 GB/T 10084-1988 振动、冲击数据分析和表示方法
Vibration and shock - Methods for analysis and presentation of data
J04 GB/T 10609. 1-1989技术制图标题栏
Technical drawings - Title blocks
J04 GB/T 10609. 2-1989技术制图明细栏
Technical drawings - Item lists
J04 GB/T 10609. 3-1989技术制图复制图的折叠方法
Technical drawings - Folding on documents
J04 GB/T 10609. 4-1989技术制图对缩微复制原件的要求
Technical drawings - Requirements for microcopying
J04 GB/T 10610-1998 产品几何技术规范表面结构 轮廓法评定表面结构的规则和方法
Geometrical Product Specifications(GPS)一Surface texture: Profile method - Rules and procedures forthe assessment 0f surface texture
J04 GB/T 10853-1989 机器理论与机构学术语
Terminology for the theory of machines and mechanisms
J04 GB/T11334-1989 圆锥公差
Cone tolerance
J04 GB/T 11336 - 2004 直线度误差检测
Measurement 0f departures from straightness
J04 GB/T 11337 - 2004 平面度误差检测
Measurement of departures from flatness
J04 GB/T 11348. 1-1999旋转机械转轴径向振动的测量和评定第l部分: 总则
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines
J04 GB/T 11348. 2-1997旋转机械转轴径向振动的测量和评定第2部分: 陆地安装的大型汽轮发电机组
Mechanical vibration 0fnon-reciprocatingmachines-Measurements on rotating shafts and evaluation criteria - Part 2: Large land-based steam turbine generator sets
J04 GB/T 11348. 3-1999旋转机械转轴径向振动的测量和评定第3部分: 耦合的工业机器
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines
J04 GB/T 11348. 4-1999旋转机械转轴径向振动的测量和评定第4部分: 燃气轮机组
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criitria - Part 4: Gas turbine sets
J04 GB/T 11348. 5 - 2002旋转机械转轴径向振动的测量和评定第5部分: 水力发电厂和泵站机组
Mechanical vibration 0f non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 5: Machine sets in hydraulic power genera-ting and pumping plants
J04 GB/T 11349. 1-1989机械导纳的试验确定基本定义与传感器
Experimental determination of mechanical mobility - Basic definitions and transducers
J04 GB/T 11349. 2-1989机械导纳的试验确定用激振器作单点激励测量
Experimental determination of mechanical mobility - Measurements using single-point translation excitation with and attached vibration exciter
J04 GB/T 11349. 3-1992机械导纳的试验确定冲击激励法
Experimental determination of mechanical mobility - Measurements using impact excitation
J04 GB/T11852 - 2003 圆锥量规公差与技术条件
Tolerances and specification 0ftaper gauges
J04 GB/T 12212-1990 技术制图焊缝符号的尺寸、比例及简化表示法
Technical drawings - Dimensions, proportions and simplified representation for welding symbols
J04 GB/T 12213-1990 技术制图玻璃器具表示法
Technical drawings for glassware
J04 GB/T 12359-1990 梯形螺纹极限尺寸
Limits of sizes for metric trapezoidal screw threads
J04 GB/T 12360-1990 圆锥配合
Cone fit
J04 GB/T 12471-1990 木制件公差与配合
Limits and fits for products 0f wood and wooden materials
J04 GB/T 12472 - 2003 产品几何量技术规范(GPS) 表面结构轮廓法木制件表面粗糙度参数及其数值
Geometrical Product Specifications(GPS)一Surface texture: Profile method - Surface roughness parame-ters and their values for wooden pieces
J04 GB/T 12604. 7-1995无损检测术语泄漏检测
Terminology for nondestructive testing – Leak testing
J04 GB/T 12604. 8-1995无损检测术语中子检测
Terminology for nondestructive testing - Neutron testing
J04 GB/T 12604. 9-1996无损检测术语红外检测
Terminology for nondestructive testing - Infrared testing
J04 GB/T 12716 - 2002 60。密封管螺纹
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on the threads
J04 GB/T 13319 - 2003 产品几何量技术规范(GPS)几何公差位置度公差注法
Geometrical Product Specifications(GPS) Geomet-ricalmlerancing – Positional tolerancing
J04 GB/T 13321-1991 钢铁硬度锉刀检验方法
The method 0fhardness testing on iron and steel with file
J04 GB/T 13325-1991 机器和设备辐射的噪声操作者位置噪声测量的基本准则(工程级)
Noise emitted by machinery and equipment - Guide-lines for the preparation of test codes of engineering grade requiring noise measurements at the operator’s orby stander’s position
J04 GB/T 13361-1992 技术制图通用术语
Technical drawings - General terms
J04 GB/T 13362. 1-1992机械制图用计算机信息交换常用长仿宋字体、代(符)号基本集
Common long fangsonga letterings and symbols in mechanical drawings and computer for information,
interchange - Basic set
J04 GB/T 13362. 2-1992机械制图用计算机信息交换常用长仿宋字体、代(符)号16×16点阵字模集
Common long fangsonga letterings and symbols in mechanical drawings and computer for information interchange - -16×16 Dot matrix font set
J04 GB/T 13362. 3-1992机械制图用计算机信息交换常用长仿宋字体、代(符)号16×16点阵字模数据集
Common long fangsonga letterings and symbols in mechanical drawings and computer for information interchange一16×16 Dot maI-x font data set
J04 GB/T 13362. 4-1992机械制图用计算机信息交换常用长仿宋矢量字体、代(符)号
Vector conunon long fangsonga letterings and symbols in mechanical drawings and computer for inforination interchange
J04 GB/T 13362. 5-1992机械制图用计算机信息交换常用长仿宋矢量字体、代(符)号数据集
Vector coInInon long fangsonga letterings and symbols in mechanical drawings and computer for inforination interchange - Data set
J04 GB/T 13362. 6-1993机械制图用计算机信息交换常用长仿宋字体、代(符)号24 x24点阵字模集
Common long fangsonga letterings and symbols in mechanical drawings and computer for information interchange - 24 x24. Dot matrix font set
J04 GB/T 13362. 7-1993机械制图用计算机信息交换常用长仿宋字体、代(符)号24 x24点阵字模数据集
Common long fangsonga letterings and symbols mechanical drawings and computer for information interchange - -24 x24 Dot matrix font data set
J04 GB/T 13576. 1-1992锯齿形(3。, 30。)螺纹牙型
Buttress threads with 3 and 30 degrees flank angle - -Profiles
J04 GB/T 13576. 2-1992锯齿形(3。, 30。)螺纹直径与螺距系列
Buttress threads with 3 and 30 degrees flank angle - General plan
J04 GB/T 13576. 3-1992锯齿形(3。, 30。)螺纹基本尺寸
Buttress threads with 3 and 30 degrees flank angle-Basic dimensions
J04 GB/T 13576. 4-1992锯齿形(3。, 30。)螺纹公差
Buttress threads with 3 and 30 degrees flank aligle-Tolerances
J04 GB/T 13823. 10一1995振动与冲击传感器的校准方法冲击二次校准
Methods for the calibration 0f vibration and shock pick-ups - Secondary shock calibration
J04 GB/T 13921-1992 关于固定结构特别是建筑物和海上结构的居住者对低频(O. 063～1Hz)水平运动响应的评价导则
Guidelines for the evaluation of the response of occupants of fixed structures. especially buildings and off-shor structures. to low-fzequency horizontal motion(0. 063～1Hz)
J04 GB/T 14091-1993 机械产品环境参数分类及其严酷程度分级
Classification 0f environmental parameters and their severities for machinery products
J04 GB/T 14124-1993 机械振动与冲击对建筑物振动影响的测量和评价基本方法及使用导则
Mechanical vibration and shock - Measurement and evaluation of vibration effects on buildings - Guide-lines for the use 0f basic standard methods
J04 GB/T 14125-1993 振动与冲击对室内振敏设备影响的测量与数据呈报方法
Vibration and shock sensitive equipment - Methods of measurement and reporting data 0f vibration and shock effects in buildings
J04 GB/T 14412-1993 机械振动与冲击加速度计的机械安装
Mechanical vibration and shock - Mechanical mounting of accelerometers
J04 GB/T 14495-1993 木制件表面粗糙度 比较样块
Roughness comparison specimens for wooden pieces
J04 GB/T 14665-1998 机械工程CAD制图规则
Mechanical engineering drawings rules of CAD
J04 GB/T 14689-1993 技术制图 图纸幅面和格式
Technical drawings一Size and layout of drawing sheets
J04 GB/T 14690 - 1993 技术制图比例
Technical drawings - Scales
J04 GIVTl4691-1993 技术制图字体
Technical drawings - Lettering
J04 GB/T14692-1993 技术制图投影法
Technical drawings - Projection methods
J04 GB/T 14791-1993 螺纹术语
The terms 0fscrew threads
J04 GB/T 15054. 1-1994小螺纹牙型
Miniature screw threads - -Profiles
J04 GB/T 15054. 2-1994小螺纹直径与螺距系列
Miniature screw threads - -general plan
J04 GB/T 15054. 3-1994小螺纹基本尺寸
Miniature screw threads - Basic dimensions
J04 GB/T 15054. 4-1994小螺纹公差
Miniature screw threads - Tolerances
J04 GB/T 15054. 5-1994小螺纹极限尺寸
Miniature screw threads - Limits of sizes
J04 GB/T 15621-1995 机械产品环境技术要求矿山环境用
Environmental technical requirements of machinery products for mine environment
J04 GB/T 15751-1995 技术产品文件计算机辅助设计与制图词汇
Technical product documentation - Requirements for computer aided design and drafting-vocabulary
J04 GB/T 15754-1995 技术制图 圆锥的尺寸和公差注法
Technical drawings - Dimensioning and tolerance of cones
J04 GB/T 15755-1995 圆锥过盈配合的计算和选用
The calculation and selection 0f cone interference fits
J04 GB/T 15756-1995 普通螺纹极限尺寸
Limits of size for general purpose screw threads
J04 GB/T 15757 - 2002 产品几何量技术规范(GPS) 表面缺陷术语、定义及参数
Geometrical product specifications(GPS)一Surface imperfections - Terms, definitions and parameters
J04 GB/T 15822-1995 磁粉探伤方法
Methods for magnetic particle testing
J04 GB/T 15823-1995 氦泄漏检验
Examination for helium leak detecting
J04 GB/T 15830-1995 钢制管道对接环焊缝超声波探伤方法和检验结果的分级
Methods 0f ultrasonic inspection and result classification of circumferential butt welds in steel pipes and tubes
J04 GB/T 16671-1996 形状和位置公差最大实体要求、最小实体要求和可逆要求
Geometrical tolerance - Maximum material requirement, least material requirement and reciprocity requirement
J04 GB/T 16673-1996 无损检测用黑光源(UV-A)辐射的测量
Measurement of UV-A radiation(black)used in non-destructive testing
J04 GB/T 16675. 1-1996技术制图简化表示法第1部分: 图样画法
Technical drawings - Simplified representation - Part1: Pictorial presentation
J04 GB/T 16675. 2-1996技术制图简化表示法第2部分: 尺寸注法
Technical drawings - -Simplified representation - Part2: Dimensioning
J04 GB/T 16722. 1-1996技术产品文件计算机辅助技术信息处理安全性要求
Technical product documentation - Handling of computer-based technical information - Security requirements
J04 GB/T 16722. 2-1996技术产品文件计算机辅助技术信息处理原始文件
Technical product documentation - Handling of computer-based technical information - Original documentation
J04 GB/T 16722. 3-1996技术产品文件计算机辅助技术信息处理产品设计过程中的状态
Technical product documentation - Handling of computer-based technical information - Phases in the product design process
J04 GB/T 16722. 4-1996技术产品文件计算机辅助技术信息处理文件管理与检索系统
Technical product documentation - Handling of computer-based technical information - Document management and retrieval systems
J04 GB/T 16747-1997 表面波纹度词汇
Surface waviness terms
J04 GB/T 16857. 1 - 2002产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测第1部分: 词汇
Geometrical product specification(GPS) - Acceptance and revivification tests for coordinate measuring machines-Part l: Vocabulary
J04 GB/T 16857. 2-1997坐标计量学第2部分: 坐标测量机的性能评定
Coordinate metrology - Part 2: Performance assessment of coordinate measuring machines
J04 GB/T 16857. 4 - 2003产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测第4部分: 在扫描模式下使用的坐标测量机
Geometrical Product Specifications(GPS) - Acceptance and revivification tests for coordinate measuring machines(CMM)一Part 4: CMMs used in scanning measuring mode
J04 GB/T 16857. 5 - 2004产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测第5部分: 使用多探针探测系统的坐标测量机
Geometrical Product Specifications(GPS) - Acceptance and reverification tests for coordinate measuring machines(CMM)一Part5: CMMs using multiple styles probing systems
J04 GB/T 16892-1997 形状和位置公差非刚性零件注法
Geometrical tolerance indication of non-rigid parts
J04 GB/T 16908-1997 机械振动轴与配合件平衡的键准则
Mechanical vibration - Balancing - Shaft and fitment key convention
J04 GB/T 16948-1997 技术产品文件词汇投影法术语
Technical product documentation - Vocabulary - Terms relating projection methods
J04 GB/T 16949-1997 字体和符号模板基本要求、识别标记及槽宽尺寸
Templates for lettering and symbol - General principles, identification markings and the size of the slot widths
J04 GB/T 17450-1998 技术制图图线
Technical drawings - Basic conventions for lines
J04 GB/T 17451-1998 技术制图图样画法视图
Technical drawings-General principles of presentation - Views
J04 GB/T 17452-1998 技术制图图样画法剖视图和断面图
Technical drawings-General principles of presentation - Sections and cuts
J04 GB/T 17453-1998 技术制图 图样画法剖面区域的表示法
Technical drawings-General principles of presentation - Representation of areas on cuts and sections
J04 GB/T 17455-1998 无损检测表面检查的金相复制件技术
Non-destructive testing Metallographic replica techniques of surface examination
J04 GB/T 17773-1999 形状和位置公差延伸公差带及其表示法
Tolerance of orientation and location - Projected tolerance zone
J04 GB/T 17851-1999 形状和位置公差基准和基准体系
Geometrical tolerance - Datums and datum system
J04 GB/T 17852-1999 形状和位置公差轮廓的尺寸和公差注法
Geometrical tolerance - Tolerance of profile
J04 GB/T 18229 - 2000 CAD工程制图规则
Rule of CAD engineering drawing
J04 GB/T 18258 - 2000 阻尼材料阻尼性能测试方法
Damping materials - Tolethod for damping properties
J04 GB/T 18594 - 2001 技术产品文件字体拉丁字母、数字和符号的CAD字体
Technical product documentation - Lettering CAD lettering of the latin alphabet numerals and marks
J04 GB/T 18617. 1 - 2002技术产品文件CAD图层的组织和命名 第1部分: 概述与原则
Technical product documentation - organization and naming of layers for CAD-Part 1: overview and principles
J04 GB/T 18618 - 2002 产品几何量技术规范(GPS) 表面结构轮廓法 图形参数
Geometrical product specification(GPS)一Surface texture: Profile method - Motif parameters
J04 GB/T 18685 - 2002 搓、滚制普通螺纹前的毛坯直径
The bar diameters for rolling general purpose metric screw threads
J04 GB/T 18686 - 2002 技术制图CAD系统用图线的表示
Technical drawings preparation 0f lines by CAD systems
J04 GB/T 18694 - 2002 无损检测超声检验探头及其声场的表征
Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field
J04 GB/T 18707. 1 - 2002机械振动评价车辆座椅振动的实验室方法第l部分: 基本要求
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements
JO4 GB/T 18776 - 2002 公差尺寸英寸和毫米的互换算
Tolerance dimensions - Conversion form inches into millimeters and vice versa
J04 GB/T 18777 - 2002 产品几何量技术规范(GPS) 表面结构轮廓法相位修正滤波器的计量特性
Geometrical product specifications(GPS)一Surface texture: Profile method - Metrological characteristics of phase correct filters
J04 GB/T 18778. 1 - 2002产品几何量技术规范(GPS) 表面结构轮廓法具有复合加工特征的表面第l部分: 滤波和一般测量条件
Geometrical product specifications(GPS)一Surface texture: Profile method；Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions
J04 GB/T 18778. 2 - 2003产品几何量技术规范(GPS)表面结构轮廓法具有复合加工特征的表面第2部分: 用线性化的支承率曲线表征高度特性
Geometrical Product Specifications(GPS)一Surface texture: Profile method - Surface having stratified functional properties-Part 2: Height characterization using the linear material ratio curve
J04 GB/T 18779. 1 - 2002产品几何量技术规范(GPS) 工件与测量设备的测量检验第1部分: 按规范检验合格或不合格的判定规则
Geometrical product specifications(GPS)-Inspection by measurement of work pieces and measuring equipment - Part l: Decision rules for proving conformance or non-conformance with specifications
J04 GB/T 18779. 2 - 2004产品几何量技术规范(GPS) 工件与测量设备的测量检验第2部分: 测量设备校准和产品检验中GPS测量的不确定度评定指南
Geometrical Product Specifications(GPS)一Inspection by measurement of porkpies and measuring equipment-Part 2: Guide to the estimation of uncertainty in GPS measurement in calibration of measuring equipment and in product verification
J04 GB/T 18780. 1 - 2002产品几何量技术规范(GPS)几何要素第l部分: 基本术语和定义
Geometrical product specifications(GPS)一Geometrical features-Part l: General terms and definitions
J04 GB/T 18780. 2 - 2003产品几何量技术规范(GPS) 几何要素第2部分: 圆柱面和圆锥面的提取中心线、平行平面的提取中心面、提取要素的局部尺寸
Geometrical Product Specifications(GPS)一Geometrical features-Part 2: Extracted median line of a cyl-inder and a cone, extracted median surface, local size of all extracted feature
J04 GB/T 18851 - 2002 无损检测渗透检验标准试块
Non-destructive testing - Penetrate testing - Reference test blocks
J04 GB/T 18852 - 2002 无损检测超声检验测量接触探头声束特性的参考试块和方法
Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles
J04 GB/T 19067. 1 - 2003产品几何量技术规范(GPS) 表面结构轮廓法测量标准第l部分: 实物测量标准
Geometrical Product Specifications(GPS) - Surface texture: Profile method - Measurement standards - Part l: Material measures
J04 GB/T 19067. 2 - 2004产品几何量技术规范(GPS) 表面结构轮廓法测量标准第2部分: 软件测量标准
Geometrical Product Specifications f GPS) - Surface texture: Profile method - Measurement standards - Part 2: Software measurement standards
J04 GB/T 19096 - 2003 技术制图 图样画法未定义形状边的术语和注法
Technical drawing - Drawing presentation - Vocabulary and indications for edges of undefined shape
J04 GB/T 19097 - 2003 技术产品文件生命周期模型及文档分配
Technical product documentation - Life cycle model and allocation of documents
J04 GB/T 19600 - 2004 产品几何量技术规范(GPS) 表面结构轮廓法接触(触针)式仪器的校准
Geometrical Product specifications(GPS)一Surface texture: Profile method-Calibration 0f contact(stylus)instruments
J05 GB/T 145 - 2001 中心孔
Center holes
J05 GB/T 944. 1-1985 螺钉用十字槽
Cross recesses for screws
J05 GB/T 1569-1990 圆柱形轴伸
Cylindrical shaft ends
J05 GB/T6403. 1-1986 球面半径
Radii 0f sphere surfaces
J05 GB/T 6403. 2-1986润滑槽
Lubricating grooves
J05 GB/T 6403. 3-1986 滚花
Knurl
J05 GB/T 6403. 4-1986 零件倒圆与倒角
Rounding and chamfered 0f parts
J05 GB/T 6403. 5-1986砂轮越程槽
Relief grooves for grinding wheels
J07 GB/T 8129-1997 工业自动化系统机床数值控制词汇
Industrial automation systems - Numerical control of machines - Vocabulary
J07 GB 11291-1997 工业机器人安全规范
Industrial robots - Safety specification
J07 GB/T 12643-1997 工业机器人词汇
Industrial robots - Vocabulary
J07 GB/T 15049. 1-1994 CAD标准件图形文件编制总则
General specification for preparing the geometry files of CAD standard parts
J07 GB/T 15049. 2-1994 CAD标准件图形文件几何图形和特性规范A类图形构件
CAD standard parts file-Specification of geometry and parameters-Elements of geometry class
J07 GB/T 15049. 3-1996 CAD标准件图形文件几何图形和特性规范铆钉
CAD standard parts file-Specification of geometry and parameters - Revets
J07 GB/T 15049. 4-1996 CAD标准件图形文件几何图形和特性规范销
CAD standard parts file-specification of geometry and parameters - Pins
J07 GB/T 15049. 5-1996 CAD标准件图形文件几何图形和特性规范螺母
CAD standard parts file-Specification of geometry and parameters - Nuts
J07 GB/T 15049. 6-1996 CAD标准件图形文件几何图形和特性规范螺栓
CAD standard parts file-Specification of geometry and parameters - Bolts
J07 GB/T 15049. 7-1996 CAD标准件图形文件几何图形和特性规范螺钉
CAD standard parts file一specification of geometry and parameters - Screws
J07 GB/T 15049. 8-1996 CAD标准件图形文件几何图形和特性规范挡圈
CAD standard parts file-Specification of geometry and parameters - rungs
J07 GB/T 15049. 9-1996 CAD标准件图形文件几何图形和特性规范垫圈
CAD standard parts file-Specification of geometry and parameters - Washers
J07 GB/T 15049. 10一1997 CAD标准件图形文件几何图形和特性规范键
CAD standard parts file-specification of geometry and parameters - Key
J07 GB/T 15049. 11-1997 CAD标准件图形文件几何图形和特性规范滚动轴承
CAD standard parts file - Specification of geometry and parameters - Roming bearings
J07 GB/T 16721-1996 工业自动化系统制造报文规范协议子集规范
Industrial automation systems - Specification of sub-sets of the protocol for the manufacturing message specification
J07 GB/T 16977-1997 工业机器人坐标系和运动命名原则
Industrial robots - - Coordinate systems and moron nomenclature
J07 GB/T 16978-1997 工业自动化词汇
Industrial automation glossary
J07 GB/T 16979. 1-1997工业自动化系统制造报文规范第l部分: 服务定义补充件1: 数据交换
Industrial automation systems - Manufacturing rues-sage specification - Part 1: Service definition AMEND-MENT 1: Data exchange
J07 GB/T 16979. 2-1997工业自动化系统制造报文规范第2部分: 协议规范补充件1: 数据交换
Industrial automation systems - Manufacturing rues-sage specification-Part 2: Protocol specification AMEND, MENT 1: Data exchange
J07 GB/T 16980. 1-1997工业自动化车间生产第l部分: 标准化参考模型和确定需求的方法论
Industrial automation - Shop floor production – Part 1: Reference model for standardization and a methodology for identification of requirements
J07 GB/T 16980. 2-1997工业自动化车间生产第2部分: 标准化参考模型和方法论的应用
Industrial automation - Shop floor production - Part2: Application 0f the reference model for standardization and methodology
J07 GB/T 18473 - 2001 工业机械电气设备控制与驱动装置间实时串行通信数据链路
Electrical equipment of industrial machines-Serial data link for real-time communication between controls and drives
J07 GB/T 18725 - 2002 制造业信息化技术术语
Manufacturing information - Technical terminology
J07 GB/T 18726 - 2002 现代设计工程集成技术的软件接口规范
Software interface specification 0f integrated technology 0f modem design engineering
J07 GB/Z 18727 - 2002 企业应用产品数据管理(PDM)实施规范
Enterprise application PDM implementing specification
J07 GB/Z 18728 - 2002 制造业企业资源计划(ERP)系统功能结构技术规范
ERP system function structure for manufacture tech-no-logy specification
J07 GB/Z 18729 - 2002 基于网络的企业信息集成规范
Specification of enterprise information integration in network environment
J07 GB/T 18755. 1 - 2002工业自动化系统制造自动化编程环境(MAPLE)功能体系结构
Industrial automation systems - Manufacturing automation programming environment(MAPLE)一Functional architecture
J07 GB/T 18755. 2 - 2003工业自动化系统与集成制造自动化编程环境(MA-PLE)第2部分: 服务与接口
Industrial automation systems and integration - Manufacturing Automation Programming Environment(MAPLE) - Part 2: Services and interfaces
J07 GB/T 18756. 1 - 2002工业自动化系统制造报文规范(MMS)一般应用基础专规第l部分: 用于MMS的关联控制服务元素 (ACSE), 表示层和会话层协议规范
Industrial automation Systems - MMS general application base profile - -Part l: Specification 0f ACSE, Presentation and session protocols for use by MMS
J07 GB/T 18756. 2 - 2002工业自动化系统制造报文规范(MMS)一般应用基础专规第2部分: 通用MMS要求
Industrial automation systems - MMS general application base profile-Part 2: Common MMS requirements
J07 GB/T 18756. 3 - 2002工业自动化系统制造报文规范(MMS)一般应用基础专规第3部分: 专用MMS要求
Industrial automation systems - - MMS general application base profile - -Part 3: Specific MMS requirements
J07 GB/T 18757 - 2002 工业自动化系统企业参考体系结构与方法论的需求
Industrial automation systems - Requirements for enterprise-reference architectures and methodology
J07 GB/T 18759. 1 - 2002机械电气设备开放式数控系统第1部分: 总则
Electrical equipment of machines-open numerical control system - Part l: General rules
J07 GB/T 18999 - 2003 工业自动化系统企业模型的概念与规则
Industrial automation systems - Concepts and rules for enterprise models
J07 GB/Z 19219 - 2003 工业自动化时限通信体系结构 时限通信系统的用户需求和网络管理
Industrial automation - Time-critical communications architectures - User requirements and network management for time-critical communications systems
J08 GB/T 13125-1991 机械工业产品湿热带防护包装方法通则
General rule for dump heat protective packaging methods of machinery products
J08 GB/T 13126-1991 机械工业产品湿热带防护包装通用技术条件
General specification for damp heat protective package ang of machinery products
J09 GB/T 6719-1986 袋式除尘器分类及规格性能表示方法
Classification and specification for bag filters
J09 GB/T 8176-1997 冲压车间安全生产通则
General rules to safety production of pressing shop
J09 GB 12265. 1-1997 机械安全防止上肢触及危险区的安全距离
Safety 0f machinery - Safety distances to prevent danger zones being reached by the upper limbs
J09 GB 12265. 2 - 2000 机械安全防止下肢触及危险区的安全距离
Safety 0f machinery - Safety distances to prevent danger zones being reached by the lower limbs
J09 GB 12265. 3-1997 机械安全避免人体各部位挤压的最小间距
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
J09 GB/T 15706. 1-1995机械安全基本概念与设计通则 第1部分: 基本术语、方法学
Safety 0f machinery - Basic concept. general principles for design - Part 1: Basic terminology. method-ology
J09 GB/T 15706. 2-1995机械安全基本概念与设计通则第2部分: 技术原则与规范
Safety 0f machinery - Basic concepts. general principles for design - Part 2: Technical principles and specifications
J09 GB/T 16181-1996 爆破片装置夹持器型式和外形尺寸
Bursting disc devices - Type and outline dimensions of holders
J09 GB 16454-1996 锯床安全防护技术要求
Sawing machines - Safeguarding specification
J09 GB 16754-1997 机械安全急停设计原则
Safety of machinery - Emergency stop-Principles for design
J09 GB/T 16755-1997 机械安全安全标准的起草与表述规则
Safety of machinery - Rules for the drafting and presentation of safety standards
J09 GB/T 16855. 1-1997机械安全控制系统有关安全部件第一部分设计通则
Safety of machinery - Safety related parts of control systems -Part 1: General principles for design
J09 GB/T 16856-1997 机械安全风险评价的原则
Safety of machinery - Principles for risk assessment
J09 GB/T 17454. 1-1998机械安全压敏防护装置第1部分: 压敏垫和压敏地板设计和试验通则
Safety of machinery - Pressure sensitive protective device - Part 1: General principles for the design and testing of pressure sensing mats and pressure sensing nooIs
J09 GB 17888. 1-1999 机械安全进入机器和工业设备的固定设施第1部分: 进入两级平面之间的固定设施的选择
Safety of machinery - Permanent means of access to machines and industrial plants-Part 1: Choice of a fixed means of access between two levels
J09 GB 17888. 2-1999 机械安全进入机器和工业设备的固定设施第2部分: 工作平台和通道
Safety of machinery - Permanent means of access to machines and industrial plants-Part 2: Working plat-forms and gangways
J09 GB 17888. 3-1999 机械安全进入机器和工业设备的固定设施第3部分: 楼梯、阶梯和护栏
Safety of machinery - Permanent means of access to machines and industrial plants-Part 3: Stairways. stepladders and guard-rall
J09 GB 17888. 4-1999 机械安全进入机器和工业设备的固定设施第4部分: 固定式直梯
Safety of machinery - Permanent means of access to machines and industrial plants - Part 4: Fixed ladders
J09 GB/T 17889. 1-1999梯子第l部分: 术语、型式和功能尺寸
ladders - Part 1: Terms, type8, functional sizes
J09 GB/T 17889. 2-1999梯子第2部分: 要求、试验和标志
Ladders-Part 2: Requirements, testing, marking
J09 GB/T 18153 - 2000 机械安全可接触表面温度确定热表面温度限值的工效学数据
Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces
J09 GB 18209. 1 - 2000 机械安全指示、标志和操作第1部分: 关于视觉、听觉和触觉信号的要求
Safety of machinery - Indication. marking and actuation - Part 1: Requirements for visual, auditory and tactile signals
J09 GB 18209. 2 - 2000 机械安全指示、标志和操作第2部分: 标志要求
Safety of machinery - Indication. marking and actuation - Part 2: Requirements for marking
J09 GB 18209. 3 - 2002 机械安全指示、标志和操作第3部分: 操作件的位置和操作的要求
Safety of machinery - Indication. marking and actua-tion-Part3: Requirements for the location and operation of actuators
J09 GB/T 18569. 1 - 2001机械安全减小由机械排放的危害性物质对健康的风险第l部分: 用于机械制造商的原则和规范
Safety of machinery - Reduction 0f risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
J09 GB/T 18569. 2 - 2001机械安全减小由机械排放的危害性物质对健康的风险第2部分: 产生验证程序的方法学
Safety 0f machinery - Reduction 0f risks t0 health from hazardous substances emitted by machinery - Part 2: Methodology leading t0 verification procedures
J09 GB/T 18717. 1 - 2002用于机械安全的人类工效学设计第1部分: 全身进入机械的开口尺寸确定原则
Ergonomic design for the safety of machinery - Part1: Principles for determining the dimensions required for openings for whole-body access into machinery
J09 GB/T 18717. 2 - 2092用于机械安全的人类工效学设计第2部分: 人体局部进入机械的开口尺寸确定原则
Ergonomic design for the safety of machinery - Part2: Principles for determining the dimensions required for openings for access of parts of the body into machinery
J09 GB/T 18717. 3 - 2092用于机械安全的人类工效学设计第3部分: 人体测量数据
Ergonomic design for the safety of machinery - Part3: Anthropometric data
J09 GB/T 18831 - 20902 机械安全带防护装置的联锁装置设计和选择原则
Safety of machinery - Interlocking devices associated with guaxds - Principles for design and selection
J09 GB/T 19436. 1 - 2004机械电气安全电敏防护装置第l部分: 一般要求和试验
Electrical safety 0f machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
J09 GB/T 19436. 2 - 2004机械电气安全电敏防护装置第2部分: 使用有源光电防护器件(AOPDs)设备的特殊要求
Electrical safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active optoelectronic protective devices(AOPDs)